Re: IBM ESS Model 2105-F20
2001-06-11 13:45:50
Subject: |
Re: IBM ESS Model 2105-F20 |
From: |
"Caffey, Jeff L." <jlcaffey AT PIER1 DOT COM> |
Date: |
Mon, 11 Jun 2001 12:47:07 -0500 |
Ruud,
Becky is right, but here's a way you can do it that seems to me to be a
little less disruptive.
Use the "-l" option and the name of the adapter on the end of your command.
Do this once for each device, then one plain config-manager to put the
vpaths into AIX's ODM...
Example if you have three paths:
cfgmgr -l fcs0
cfgmgr -l fcs1
cfgmgr -l fcs2
cfgmgr
This way, cfgmgr only runs once (for the specified device each time) and is
much faster if you have many devices on a high-end server.
Thank you,
Jeff Caffey
Enterprise Systems Programmer
(AIX & Storage Administrator)
Pier 1 imports, Inc. - Information Services
jlcaffey AT pier1 DOT com
Voice: (817) 252-6222
Fax: (817) 252-7299
-----Original Message-----
From: Davidson, Becky [mailto:Becky.Davidson AT EGR DOT COM]
Sent: Monday, June 11, 2001 10:29 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: IBM ESS Model 2105-F20
If you have more then one path going to data then you need to run cfgmgr for
each path. For example if you have 3 paths then you often need to run
cfgmgr 3 times to get all of the paths.
Becky
|
|
|