ADSM-L

Re: Backupsets

2001-06-05 00:42:49
Subject: Re: Backupsets
From: Mark Stapleton <stapleton AT BERBEE DOT COM>
Date: Mon, 4 Jun 2001 23:41:13 -0500
Michael Oski wrote:
>
> Scott,
>
> I think you can drill down through the monitor.nlm and look at the
> devices installed on a Netware server. It should give you at least a
> starting point to determine what name TSM would use. It's been a few
> years since I worked on a Netware server, but I think from monitor.nlm
> you select devices, then the controller the tape unit's on. Might be off
> on the menu option names though.

There is a *much* easier way. Run the dsmcad module on the Netware
client, and log onto the client using the client web interface. When you
do so, you will get an option to restore the backupset from the tape
drive that is on the server.

--
Mark Stapleton (stapleton AT berbee DOT com)
Mark Stapleton (stapleton AT berbee DOT com)
<Prev in Thread] Current Thread [Next in Thread>