More generally, you can go to rpmfind and search via distro or filename.
http://rpmfind.net/linux/RPM/
Cheers, Suad
--
On Fri, Feb 23, 2001 at 11:30:56AM -0500, John Marquart wrote:
On Fri, Feb 23, 2001 at 11:30:56AM -0500, John Marquart wrote:
> I am not working on a 7.0 system - so I may be slightly off, but I am
> pretty sure that libstdc++-libc6.1-1.so.2 is included in an rpm labeled:
>
> compat-libstdc++-6.2-2.9.0.9.i386.rpm which is available at:
>
> ftp://ftp.redhat.com/pub/redhat/redhat-7.0/i386/en/RedHat/RPMS/
>
> -john
>
>
> On Fri, 23 Feb 2001, Michael Jung wrote:
>
> > I took a few days to search around but didn't come up with a solution.
> >
> > I'm able to install the Tivoli client on a 6.1 RedHat system. This system
> > is installed as server WITH gui.
> > The so called E-Smith-server isn't running a gui and I also don't need any
> > gui.
> >
> > (1)-----------------------------------
> > Joerg Nouvertne wrote:
> > > cannot open shared object file: No such file or directory
> > ^^^^^^^^^^^^^^^^^^
> > This indicates, that the library running on your system has been found, but
> > does not contain the expected object file. I know that RedHat 7.0 has a
> > special version of the glibc and gcc installed, which is not binary
> > compatible to non-RedHat binaries. Is this client compiled for RedHat 7.0?
> >
> > --> I have not compiled it because it is an .rpm and specified to run with
> > RedHat 7.0
> > (2)-----------------------------------
> > Richard Sims wrote:
> > > Subject: Re: libstdc++-libc6.1-1.so.2 dependency in RedHat7.0 ?
> > > > > dsmc: error while loading shared libraries: =
> > > libstdc++-libc6.1-1.so.2:
> > > > > cannot open shared object file: No such file or directory
> > > Michael - You seem to not have the appropriate libraries as
> > > specified in the Tivoli requirements page
> > > http://www.tivoli.com/support/storage_mgr/adcllin.htm .
> > > Check your Linux system via the 'rpm' command to see if it
> > > has the pre-reqs that TSM calls for.
> >
> > I know the webpages, they say its specified for RedHat 7.0, my server is a
> > kickinstall based on RedHat 7.0. The comment from E-Smith dev list was:
> > > > Question: There are any differences between standard installed
> > > > libaries on RedHat 7.0 to E-Smith 4.1rc4 ?
> > >
> > > No. (and please upgrade from 4.1rc4 to 4.1 or 4.1.1)
> >
> > When I do:
> > [root@SONNE Tivoli]# rpm -i TIVsm-BA.i386.rpm
> > error: failed dependencies:
> > libICE.so.6 is needed by TIVsm-BA-4.1.2-1
> > libSM.so.6 is needed by TIVsm-BA-4.1.2-1
> > libX11.so.6 is needed by TIVsm-BA-4.1.2-1
> > libXext.so.6 is needed by TIVsm-BA-4.1.2-1
> > libXp.so.6 is needed by TIVsm-BA-4.1.2-1
> > libXpm.so.4 is needed by TIVsm-BA-4.1.2-1
> > libXt.so.6 is needed by TIVsm-BA-4.1.2-1
> > libstdc++-libc6.1-1.so.2 is needed by TIVsm-BA-4.1.2-1
> > As I understand all libs except the last one only required for a GUI which
> > I would not use.
> > On my server I found:
> > # rpm -qa | grep libst
> > libstdc++-2.96-69
> > where the files are in:
> > /usr/lib/libstdc++-3-libc6.2-2-2.10.0.a
> > /usr/lib/libstdc++-libc6.2-2.a.3
> >
> > It seems that this lib don't fullfill the requierements.
> >
> > A suggestion was:
> > > You can hope that the non-GUI bit does not need C++ libraries, you can
> > > downgrade the C++ libraries to RH6.2 versions and hope that it doesn't
> > > break anything, or you can try to get Tivoli to issue a new version and/or
> > > correct their release notes.
> > >
> > > C++ library compatibility has been a big issue with Rh7.
> >
> > Kind regards,
> > Michael Jung
> >
>
>
> John "Jamie" Marquart | This message posted 100% MS free.
> Digital Library SysAdmin | Work: 812-856-5174 Pager: 812-334-6018
> Indiana University Libraries | ICQ: 1131494 D'net Team: 6265
|
