RAID Levels for *SM volumes
2000-09-25 10:42:42
Dear all,
I need advice which RAID Levels (RAID0, RAID5, non-RAID) one should use for
best performance/availability:
TSM DB Volumes
TSM Log Volumes
TSM Diskpool Volumes
As far my knowledge goes about TSM I know that I should place the DB on one
disk and the log on another disk with TSM mirroring or hardware RAID1. This
is common practice for all DB's.
I am pretty unsure about the diskpool volumes. Will the client sessions
generate large sequential writes (non-RAID) OR will there be random writes
in place (RAID0).
Hardware: IBM RS/6000 with SSA disks.
Any help appreciated!
Eurodis Schweiz AG
Data Division
Timo Kilchenmann
Systems Engineer
-----------------------------------------------------------
Timo Kilchenmann E-Mail timo.kilchenmann AT eurodis DOT ch
Timo Kilchenmann E-Mail timo.kilchenmann AT eurodis DOT ch
Eurodis Schweiz AG Phone +41 1 843 34 91 (direct)
Bahnstrasse 58/60 or +41 1 843 32 32
CH-8105 Regensdorf Telefax +41 1 843 34 24
Switzerland Mobile +41 79 417 43 55
http://www.eurodis.ch
-----------------------------------------------------------
=========================================================================
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- RAID Levels for *SM volumes,
Timo Kilchenmann <=
|
|
|