ADSM-L

Re: Netware "Directory path not found" problem

2000-08-15 08:00:10
Subject: Re: Netware "Directory path not found" problem
From: Jim Kirkman <jmk AT EMAIL.AIS.UNC DOT EDU>
Date: Tue, 15 Aug 2000 08:00:04 -0400
Timo,

Try running a vrepair on the affected volumes and then try an incremental. What
version of the client did you upgrade from? I've had this problem, but only on
one of my Netware boxes, and I just settled with one of the older ADSM clients.

Jim

Timo Kilchenmann wrote:

> Dear all,
>
> I have problems with Netware Version 5 TSM Client Version 3.7.3.
>
> When I try a backup I get the following error. It seams like the error
> occurs when TSM is backing up the sys: volume. On some system the backup
> will stop immediately. On others the backup will continue with the other
> volumes.
>
> 11.08.2000 12:42:46 (TSA500.NLM 5.3 259) This program cannot allocate a
> directory handle.
> 11.08.2000 12:42:46 ANS1076E *** Directory path not found ***
>
> TSA500 is at version 5.03
> TSANDS is at version 5.11
> NDS version 8.?
>
> IBM/Tivoli support is rather clueless. So any help is very much appreciated.
>
> Eurodis Schweiz AG
> Data Division
> Timo Kilchenmann
> Systems Engineer
> -----------------------------------------------------------
> Timo Kilchenmann     E-Mail  timo.kilchenmann AT eurodis DOT ch
> Eurodis Schweiz AG   Phone   +41 1 843 34 91 (direct)
> Bahnstrasse 58/60    or      +41 1 843 32 32
> CH-8105 Regensdorf   Telefax +41 1 843 34 24
> Switzerland          Mobile  +41 79 417 43 55
>                      http://www.eurodis.ch
> -----------------------------------------------------------

--
Jim Kirkman
Jim Kirkman
AIS UNC-Chapel Hill
966-5884
<Prev in Thread] Current Thread [Next in Thread>