Problems with 3590 tapes
2000-07-26 17:24:23
My system is HPUX 11.0 and TSM 3.7.3. We are using a 3494 with 2 3590 drives.
We are having problems with the backup. One of the nodes is a quite big SAP
application with about 200 GB Oracle data base in several filesystems. We want
to use the multiple parallel sessions of TSM to send data to the two tapes
simultaneously in order to reduce the time needed for the backup.
When the scheduler starts, many sessions are also started but only one tape
mounted. These are the messages from the activity log:
07/24/00 23:15:01 ANR2561I Schedule prompter contacting ESALCO10
(session
64) to start a scheduled operation.
07/24/00 23:15:01 ANR0406I Session 65 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65005)).
07/24/00 23:15:03 ANR0406I Session 66 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65006)).
07/24/00 23:15:06 ANR0406I Session 67 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65008)).
07/24/00 23:15:08 ANR0406I Session 68 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65012)).
07/24/00 23:15:12 ANR0406I Session 69 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65013)).
07/24/00 23:15:16 ANR0406I Session 70 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65014)).
07/24/00 23:15:22 ANR0406I Session 71 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65015)).
07/24/00 23:15:28 ANR0406I Session 72 started for node ESALCO10 (HPUX)
(Tcp/Ip 130.8.100.133(65017)).
07/24/00 23:15:55 ANR8337I 3590 volume 155609 mounted in drive DRIVEA
(/dev/rmt/c3t0d0BEST).
What could be the reason for not mounting both tapes? we have defined
maxnumpoints as 2
We have included many filesystem in domain sentences, how the system should
distribute them among the tapes?
We still have more problems. When the volume reaches the end of tape we get the
error messages that follow:
07/25/00 00:57:55 ANR9999D pvrntp.c(3172): DumpBlock error on drive
DRIVEA
(/dev/rmt/c3t0d0BEST); already reached EOV once.
07/25/00 00:57:55 ANR1411W Access mode for volume 155609 now set to
"read-only" due to write error.
07/25/00 00:57:55 ANR0523W Transaction failed for session 66 for node
ESALCO10 (HPUX) - error on output storage device.
07/25/00 00:58:00 ANR8302E I/O error on drive DRIVEA
(/dev/rmt/c3t0d0BEST)
(OP=WRITE, CC=0, KEY=00, ASC=00, ASCQ=00,
SENSE=F0.00.40.00.00.00.00.58.00.00.00.00.00.00.FF.23.C4-
.98.40.00.00.05.01.91.00.0B.00.00.00.00.0A.00.00.00.00.0-
0.00.00.00.00.00.00.00.00.00.00.00.08.35.DB.01.90.E3.0F.-
00.00.00.00.00.00.00.00.00.00, Description=An
undetermined error has occurred). Refer to Appendix
B in
the 'Messages' manual for recommended action.
07/25/00 00:58:00 ANR9999D pvrntp.c(1673): Error writing EOT to NTP
volume
155609.
07/25/00 00:58:40 ANR8468I 3590 volume 155609 dismounted from drive
DRIVEA
(/dev/rmt/c3t0d0BEST) in library SILO.
As you can see the cc=0 and I do not know how to interpreter the sense
information. Have you seen something similar? Is the tape good? can we trust
this backup? What could be the problem?
Thanks very much for any help, we are having a lot of problems in this
installation and do not know how to proceed.
Regards
Maria
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- Problems with 3590 tapes,
Maria Paz Gimeno <=
|
|
|