Hi there,
I found a operational STK 9704 (4mm DAT/25 slots/2 drives) which I would to use
for testing TSM 3.7.x. (on AIX 4.3.3)
It works fine up to the point where is should move a tape from the drive to the
library. The tape is unloaded form the drive an all stops. The display shows:
"DRIVE LATCHED" and in the activity log I get the next messages:
ANR8300E I/O error on library STK (OP=00006C03, CC=207, KEY=05, ASC=3B,
ASCQ=83, SENSE=70.00.05.00.00.00.00.0A.00.00.00.00.3B.83.00.00.00-
.00.00.20.00.00.00.00.00.00.00.00.20., Description=Device
is not in a state capable of performing request). Refer
to Appendix B in the 'Messages' manual for recommended action.
ANR9999D mmsscsi.c(10829): Could not move volume (label specified B27902) from
slot 25 to slot 2.
Please reply to my e-mail address
Hans Staal
--------------------------------------------------------------
Aecis B.V.
Aecis B.V.
Ing. J.H. Staal, Hans
Teamleider ICT-Dienstverlening
Grote Voort 29, 8041 BC Zwolle
Postbus 546, 8000 AM Zwolle
Tel: +31 (0)38 426 65 66
Fax: +31 (0)38 426 65 00
E-mail: hstaal AT aecis DOT nl
Website: www.aecis.nl
------------------------------------------------------------------
=======================================================================
|