ADSM-L

TSM 3.7.2 + DLT8000 = DLT7000

2000-05-15 06:02:59
Subject: TSM 3.7.2 + DLT8000 = DLT7000
From: Michael Gimm <michael.gimm AT FOURLEAF DOT DK>
Date: Mon, 15 May 2000 11:02:59 +0100
Hi there

TSM' DeviceDriver tends to use DLT8000 Drives as DLT7000 drives.
I've set up 6 TSM/ADSM servers with DLT8000 and only in one installation did TSM
use the Drives as DLT8000 - this was vertion 3.7.1.0.
Another 4 was 3.7.2.0 and when you do a label of a tape it's labled as DLT7000
(35C LED is on and not the 40C).

I've tried using the Device Wisard on NT, I've tried defining the drives with
FORMAT=40C and with FORMAT=DRIVE - TSM still only sees the drives as DLT7000.

I've tried to update the FirmWare in the drives - dosn't help.

Any idears?



Med venlig hilsen
Four Leaf Technologies A/S, Viby J.
Michael L Gimm
Technical Consultant

Mail        :  michael.gimm AT fourleaf DOT dk
Direkte     :  +45 87 38 60 54
Tlf.        :  +45 70 25 45 00
Fax         :  +45 70 25 45 01
Mobil       :  +45 28 19 60 54
Web    :  http://www.fourleaf.dk/
<Prev in Thread] Current Thread [Next in Thread>
  • TSM 3.7.2 + DLT8000 = DLT7000, Michael Gimm <=