ADSM-L

Re: Moving library definitions

2000-05-12 04:05:34
Subject: Re: Moving library definitions
From: Ian Wilkes <ian.wilkes AT PHOENIXSM DOT COM>
Date: Fri, 12 May 2000 09:05:34 +0100
Do you intend to use both libaries together for any reason. If not then...
...as you are moving from an L06 to an L12 all you need to do is note the
current scsi id's used for the L06 and setup the 1st and 2nd drives in the
L12 to be the same from the library front panel.

Then
shutdown TSM and swap the libraries.
transfer the tapes over
restart
audit the library
define any additional drives


Ian


******************Internet Email Confidentiality Footer*******************

Privileged/Confidential Information may be contained in this message.  If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone.  In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.

Phoenix IT Group Limited is registered in England and Wales under company
no. 3476115
Registered Office: Technology House, Hunsbury Hill Avenue, Northampton, NN4
8QS
<Prev in Thread] Current Thread [Next in Thread>