ADSM-L

Re: Rhode Island Hotel

1999-09-14 14:04:17
Subject: Re: Rhode Island Hotel
From: William Dias <wdias AT US.BNSMC DOT COM>
Date: Tue, 14 Sep 1999 14:04:17 -0400
Thanks
        I tried the update to read write, but that failed.  I did not try to
set the status as private.

Thanks again
Bill

Rick Marshall wrote:

>    Are you sure this is a new tape? According to your display, this tape is
> already in a storage pool called TAPECOPYPOOL, so you must check the tape
> into the library as PRIVATE ie. STATUS=PRIVATE on your checkin command. The
> "Scratch Volume?: Yes" means that the tape was part of a scratch pool, not
> that it is a scratch tape now.
>        I also see that  "Access: Unavailable" so that would also have to be
> reset to readwrite or readonly before it can be used again.
>        The Q LIBV command will tell you what volumes ADSM thinks are live
> (PRIVATE) so there is no point checking them into the library if it is
> scratch tapes you need.
>
> Rick
>
> William Dias <wdias AT US.BNSMC DOT COM>@VM.MARIST.EDU> on 09/14/99 11:53:37 
> AM
>
> Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
> Sent by:  "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
> To:   ADSM-L <ADSM-L AT VM.MARIST DOT EDU>
> cc:
> Subject:  Re: Rhode Island Hotel
>
> Thanks
>         That gives me a new problem as shown below.  I tried this with a
> new tape
> and the process worked, but I can't find the tape.  I assume a new tape has
> to be
> assigned to a storage pool.  Is there anything else I need to do to add new
> tapes.
>
> Here is the current error.
> 9/14/1999 11:25:56  ANR8443E  : Volume 000139 in library STK9730 cannot be
>                       assigned a status of SCRATCH.
> 09/14/1999 11:25:56  ANR8832E CHECKIN LIBVOLUME for volumes in search mode
> in
>                       library STK9730 failed.
> 09/14/1999 11:25:56  ANR0985I Process 77 for CHECKIN LIBVOLUME running in
> the
>                       BACKGROUND completed with completion state FAILURE at
>                       11:25:56.
>
> adsm> q vol 000139 f=d
>                    Volume Name: 000139
>              Storage Pool Name: TAPECOPYPOOL
>              Device Class Name: DLTCLASS
>        Estimated Capacity (MB): 30,403.3
>                       Pct Util: 91.8
>                  Volume Status: Full
>                         Access: Unavailable
>         Pct. Reclaimable Space: 8.9
>                Scratch Volume?: Yes
>                In Error State?: No
>       Number of Writable Sides: 1
>        Number of Times Mounted: 3
>              Write Pass Number: 1
>      Approx. Date Last Written: 09/05/1999 14:29:37
>         Approx. Date Last Read: 09/04/1999 05:02:49
>            Date Became Pending:
>         Number of Write Errors: 0
>          Number of Read Errors: 0
>                Volume Location: Brown & Sharpe
> Last Update by (administrator): ADMIN
>          Last Update Date/Time: 09/13/1999 11:50:17
> more...   (<ENTER> to continue, 'C' to cancel)
>
> Thanks Again
> Bill
>
> Doug Thorneycroft wrote:
>
> > Don't specify the volume name with search=bulk
> > try the same command without the volume name.
> >
> > On Tuesday, September 14, 1999 7:31 AM, William Dias
> [SMTP:wdias AT US.BNSMC DOT COM]
> > wrote:
> > > Unlike the Hotel California, Hotel RI allows you to check-out, but you
> > > never check back-in!
> > >
> > > Help!  Our ADSM expert is on vacation so as the AIX administrator I
> said
> > > "I can do that"!    This is week two and my pool of scratch tapes
> runith
> > > empty.  When I try to return tapes this is what I get:
> > >
> > > adsm> checkin libv stk9730 000139 search=bulk status=scratch
> > > checklabel=barcode
> > > ANR2020E CHECKIN LIBVOLUME: Invalid parameter - SEARCH.
> > > ANS8001I Return code 3.
> > >
> > > What incantation must I enter to appease the evil Gods of syntax?
> > >
> > > Thanks
> > > Bill Dias
> > > Brown & Sharpe
> > > AIX Systems Administrator
<Prev in Thread] Current Thread [Next in Thread>