Hi,
I 've a SLR50 filled with about 15GB and got a track following error
when a new schedule
tries to backup..
Is this a timeout or a hardware or media error?
Where can I get information from?
Thanks in advance
=============================================================
Date/Time Message
--------------------
----------------------------------------------------------
----------------------------------------------------------
06/17/1999 20:01:20 ANR0984I Process 7271 for MIGRATION started in the
06/17/1999 20:01:20 ANR0984I Process 7271 for MIGRATION started in the
BACKGROUND at 20:01:20.
06/17/1999 20:01:20 ANR1000I Migration process 7271 started for
storage pool
DISKPOOL.
06/17/1999 20:01:25 ANR1001I Migration process 7270 ended for storage
pool
BACKUPPOOL.
06/17/1999 20:01:25 ANR0986I Process 7270 for MIGRATION running in the
BACKGROUND processed 16 items for a total of
6,774,784
bytes with a completion state of SUCCESS at
20:01:25.
06/17/1999 20:01:54 ANR8302E I/O error on drive MT5.0.0.0 (MT5.0.0.0)
(OP=WRITE, CC=306, KEY=03, ASC=09, ASCQ=00,
SENSE=F0.00.-
03.00.00.80.00.0E.00.00.00.00.09.00.00.00.00.00.00.02.0B-
.00., Description=Drive or media failure). Refer
to
Appendix B in the 'Messages' manual for
recommended
action.
06/17/1999 20:01:54 ANR8359E Media fault detected on QIC volume ADSM12
in
drive MT5.0.0.0 (MT5.0.0.0) of library QICLIB1.
06/17/1999 20:01:54 ANR1411W Access mode for volume ADSM12 now set to
"read-only" due to write error.
06/17/1999 20:01:54 ANR1025W Migration process 7271 terminated for
storage
pool DISKPOOL - insufficient space in subordinate
storage
pool.
|