Vincent,
I didn't do it at the first time. Now I `halt` the adsm server and
restarted. I am getting the same error message still.

On Tue, 18 May 1999, van de Laak, Vincent wrote:

> Did you start and restart the server after you changed the optionsfile?
>
>
>
> With kind regards,
>
> Vincent v/d Laak
>
> Origin TIS-DS Unix System Management
> Groenewoudseweg 1
> 5621 BA Eindhoven, The Netherlands
> Building:   VA
> Room   :   181
> Phone:  +31 (0)40 27 86809
> Fax:       +31 (0)40 27 83962
> E-mail: Vincent.vandeLaak AT nl.origin-it DOT com
>
>
>
> -----Original Message-----
> From: Logan Varatharasa [mailto:loganv AT AUSTIN.IBM DOT COM]
> Sent: Tuesday, May 18, 1999 5:13 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Labelling question.
>
>
> Hello All.
>
> I tried to use dsmlabel program on AIX to label my tapes.
>
> So I issued the command :  `dsmlabel -drive=/dev/mt0,23`
>
> and I got an error message:
>
>    "ANR0000E Error reading message repository for language AMENG."
>
> I am not sure if the language settings are wrong in
> some files. I had LANGuage en_US by default in
> /usr/lpp/adsmserv/bin/dsmserv.opt file. I changed that to LANGuage AMENG
> after the error message and still getting the same error.
>
> Then I thought of labelling from the adsm server console and tried
>
> LABEL LIBVOLUME TAPELIBRARY1 DSM001.
>
> First tape labelled ok.
>
> >From the 2nd tape on I am getting the following error:
> ----------------------------------------------------------------------
> adsm>
> ANR8306I 004: Insert 8MM volume DSM003 R/W into the slot with element
> number 12 of library TAPELIBRARY1 within 57 minutes; issue 'REPLY' along
> with the request ID when ready.
> reply 4
> ANR2017I Administrator SERVER_CONSOLE issued command: REPLY 4
> ANR8499I Command accepted.
> adsm>
> ANR8302E I/O error on drive TAPEDRIVE2 (/dev/mt1) (OP=WRITE, CC=404,
> KEY=45,
> ASC=30, ASCQ=05,
> SENSE=70.00.45.00.00.00.00.18.00.00.00.00.30.05.00.00.00.00.0-
> 0.01.00.00.00.04.92.B5.00.00.DB.00.00.00.,
> Description=Media incompatibility).
> Refer to Appendix B in the 'Messages' manual for recommended action.
> ANR8806E Could not write volume label DSM003 on the tape in library
> TAPELIBRARY1.
> ANR8814I Remove volume DSM003 from slot element 12 of library
> TAPELIBRARY1.
> ANR8802E LABEL LIBVOLUME process 6 for library DSM003 failed.
> ANR0985I Process 6 for LABEL LIBVOLUME running in the BACKGROUND
> completed with completion state FAILURE at 09:50:12.
> -----------------------------------------------------------------------
>
>
> I will appreciate all suggestions.
>
> Logan.
> IBM Austin, TX.
>