Re: 3575 configuration
1998-09-13 17:22:44
Yes.
The library changer can be addressed either as /dev/smc0, or as /dev/rmtX.smc,
where X is the tape drive number. Be a little careful with this latter
addressing, however, as only tape drives on the same SCSI bus as the library
can address the library.
Peter Gathercole
Open Systems Consultant
Bo Ossinger wrote:
> Can anyone tell me if a 3575 tape library connects to AIX/ADSM as a single
> scsi library device, even if it contains up to 6 tape drives?
>
> ====================================================================
> Bo R. Ossinger phone: 509-335-0920
> Washington State University fax: 509-335-6635,,,50920
> Information Technology mailto:ossinger AT wsu DOT edu
> Production Support Systems http://www.wsu.edu/prod_supp/Pss.html
> PO Box 641222
> Pullman, WA 99164-1222
> ====================================================================
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- 3575 configuration, Bo Ossinger
- Re: 3575 configuration, Bill Smoldt
- Re: 3575 configuration, Dirk Kastens
- Re: 3575 configuration, Bill Smoldt
- Re: 3575 configuration, Steven P Roder
- Re: 3575 configuration, Ray Pratts
- Re: 3575 configuration, Ian Blair
- Re: 3575 configuration,
Peter Gathercole <=
- Re: 3575 configuration, Jennifer Davis
- 3575 configuration, ADSM : Dist Stor Manager [mailto:ADSM-L
- Re: 3575 configuration, ADSM : Dist Stor Manager [mailto:ADSM-L
|
|
|