ADSM-L

Re: Client Option Sets in ADSM for NT V3

1998-06-17 19:34:31
Subject: Re: Client Option Sets in ADSM for NT V3
From: "Whitehead, Hilary" <HWhitehead AT CAISO DOT COM>
Date: Wed, 17 Jun 1998 16:34:31 -0700
In case you guys haven't seen this before.

Hilary Whitehead
IBM Global Services

G'day Trevor,

I found this last night ...

  -- 8< --

APAR Identifier ...... IC20568      Last Changed ........ 98/04/30
CLIENT OPTION "INCLEXCL" DEFINED ON V3 SERVER WITH DEFINE
CLIENTOPT WITH '/.../' IN PATH NOT HONORED ON 3.1.0.3 CLIENT

 [ .. ]

ERROR DESCRIPTION:
Client option "INCLEXCL" defined on any V3 server with DEFINE
CLIENTOPT is not used by the 3.1.0.3 client if "/.../" is
in the pathname.

 [ .. ]

PROBLEM SUMMARY:
****************************************************************
* USERS AFFECTED: All b/a client                               *
****************************************************************
* PROBLEM DESCRIPTION: Client option "INCLEXCL" defined on a   *
*                      V3 server with define CLIENTOPT is not  *
*                      used by the 3.1.0.3 client.             *
****************************************************************
* RECOMMENDATION:Apply the csd when available                  *
****************************************************************

  -- 8< --

Regards,
--
  Mr Jason E Meaden                                  IBM Australia Ltd
  Mr Jason E Meaden                                  IBM Australia Ltd
  Software Service Specialist (Asia Pacific)         55 Coonara Avenue
  ADSM & VisualAge Support - Cell Leader      West Pennant Hills  2125
  Phone: 13 24 26 * Fax: 61 2 9354 7797 * Tie: 49427 * VM: RTP(MEADEN)





ADSM-L AT VM.MARIST DOT EDU on 05/15/98 11:28:42 AM
Please respond to ADSM-L AT VM.MARIST DOT EDU
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Cleint option sets


Hi,

We are still having problems with options sets. This is on WindowsNT,
client version 3.1.0.3 to an AIX server version 3.1.1.2. I intend to
open a call with IBM about this, but thought that I would see if anyone
else is seeing the problem first.

I have set up an option set and associated it with a node. None of the
options inside the option set appear to be used. For example, I have the
following inclexcl lines:

Inclexcl exclude c:\....\*
Inclexcl include c:\temp\*.log

If I run an incremental backup of C:, all files are backed up. I have
verified that all other options are being ignored by using the Q OPTION
command from the client.

Am I doing something wrong, or are options sets still seriously broken?


Trevor
------------------------------------------------------------------------
------------------------------------------------
------------------------------------------------
Trevor Foley
Trevor Foley
Bankers Trust Australia Limited
Phone: 61-2-9259 3944    Fax: 61-2-9259 2659




> -----Original Message-----
> From: Robinson, Cris [SMTP:Cris.Robinson AT LIBERTYMUTUAL DOT COM]
> Sent: Wednesday, June 17, 1998 11:40 AM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Re: Client Option Sets in ADSM for NT  V3
>
> I've tried the following:
>
> include c:\my documents\...\*.*
> include "c:\my documents\...\*.*"
> "include c:\my documents\...\*.*"
>
> We are on NT servers with 95 clients.
> I don't think the functionality is there yet.
> everything I have seen makes it sound like
> only unix clients can use this function right now.
>
> Thanks -
> CR
>
> ________________________
> Cris Robinson
> Senior Technical Analyst
> Desktop Services Technical Support
> Liberty Mutual Insurance
> 603.431.8400.54837
> cris.robinson AT libertymutual DOT com
>
> > -----Original Message-----
> > From: Laura Buckley [SMTP:buckley AT STORSOL DOT COM]
> > Sent: Wednesday, June 17, 1998 1:43 PM
> > To:   ADSM-L AT VM.MARIST DOT EDU
> > Subject:      Re: Client Option Sets in ADSM for NT  V3
> >
> > Hi Chris,
> >
> > This is supported.  You have to use the option name  inclexcl  and
> > then
> > state either include or exclude and the filename enclosed in quotes
> > (i.e.
> > "include c:\...\*.*")  Be sure that if you use the sequence number,
> > you
> > start at 0.
> >
> >
> > Laura Buckley
> > Storage Solutions Specialists, Inc.
> > (719) 531-7171
> > buckley AT storsol DOT com
> >
> >
> > -----Original Message-----
> > From:   Robinson, Cris [SMTP:Cris.Robinson AT LIBERTYMUTUAL DOT COM]
> > Sent:   Wednesday, June 17, 1998 10:14 AM
> > To:     ADSM-L AT VM.MARIST DOT EDU
> > Subject:        Client Option Sets in ADSM for NT  V3
> >
> > Has anyone been able to define include and exclude statements in
> > client
> > option sets on ADSM V3 for NT ?
> > Is this supported yet?
> >
> > TIA
> > CR
> > ________________________
> > Cris Robinson
> > Senior Technical Analyst
> > Desktop Services Technical Support
> > Liberty Mutual Insurance
> > 603.431.8400.54837
> > cris.robinson AT libertymutual DOT com
<Prev in Thread] Current Thread [Next in Thread>