I tried your solution this morning and I am getting the following error
when trying to use the alternate inclexcl list:


05/26/1998 10:35:02  ANR0406I Session 406 started for node HP9000 (HPUX)
                      (Tcp/Ip 205.144.62.66(1050)).
05/26/1998 10:35:02  ANR0444W Protocol error on session 406 for node
HP9000
                      (HPUX) - out-of-sequence verb (type SignOff)
received.
05/26/1998 10:35:02  ANR0484W Session 406 for node HP9000 (HPUX)
terminated -
                      protocol violation detected.

        I did not change any options in the dsm.sys file except the
inclexcl list. I simply copied the data.
        In the dsmerror log, I get:

05/26/1998 10:34:48 sessOpen: Error 137 from signon authentication.
05/26/1998 10:34:48 sessOpen: Error 137 from signon authentication.
05/26/1998 10:34:48 ANS1025E Session rejected: Authentication failure

        Ring any bells....?

Sharon Stidd

Client/Server Administrator
Alliance Data Systems
800 Tech Center Drive
Gahanna OH 43230
614/729-4340
Fax 614/729-4499

> ----------
> From:         Ulrich Suer[SMTP:Suer_Ulrich AT KHIS.KRUPP DOT COM]
> Sent:         Saturday, May 23, 1998 5:52 AM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Betreff: running multiple backups
>
> Hi,
> I'm running ADSM on an AIX-System.
> You can specify several SERVER-Sections (with specific
> include-exclude-lists) in the file dsm.sys. Then you have to create
> different dsm.opt-files. Every Option-Files links to its own
> Server-Section in dsm.sys . To activate the dsm.opt-file you have tp
> export DSM_CONFIG environment-variable.
>
> Sample:
>
> dsm.sys
>
>       SERVERNAME       ADSMSRV1
>       ....
>       INCLEXCL     inclexcl.lst1
>       ...
>
>       SERVERNAME        ADSMSRV2
>       ...
>       INCLEXCL      inclexcl.lst2
>       ...
>
>
> dsm.opt1
>
>       SERVERNAME    ADSMSRV1
>       ....
>
>
> dsm.opt2
>
>       SERVERNAME   ADSMSRV2
>       ...
>
>
> Shell-Script
>
> #!/usr/bin/ksh
>
> #1st backup
> export DSM_CONFIG=dsm.opt1  # or "set" in another shell
> dsmc inc
>
> #2nd backup
> export DSM_CONFIG=dsm.opt2  # or "set" in another shell
> dsmc inc
>
> If you're running backups with the ADSM-API then you have to export
> DSMI_CONFIG too.
>
>
> Hope it works on HP-UX.
>
> Ulrich
>
>
>
>
> >>> "Stidd, Sharon" <SStidd AT ALLDATA DOT NET> 22.05.98 16.49 >>>
> I have been searching the list but I cannot find where this was
> discussed before.  I have one HP-UX system that we will need to run
> two
> backups on.  One, would exclude the cooked database filesystems and do
> a
> normal unix backup. The other would include these db filesystems.  How
> can I do this?  They will both be running from the client as commands
> (dsmc inc ....). I tried to specify DOMAIN on the command line to no
> avail. Is there a dsmc option to use a different opt file?  Or will I
> have to "manually" change the inclexcl file each time?
>
> Thanks in advance!
>
>
> Sharon Stidd
>
> Client/Server Administrator
> Alliance Data Systems
> 800 Tech Center Drive
> Gahanna OH 43230
> 614/729-4340
> Fax 614/729-4499
>