Andrew,

   Thanks for all your help, I am now using the Webshell OK and it
seems fine.

Cheers




---Andrew Raibeck <storman AT US.IBM DOT COM> wrote:
>
>
> Okay, a couple of more things on this... one of the ADSM server
developers
> mentioned that this APAR is fixed in a forthcoming PTF, and that you
will need
> to specify:
>
> COMMMETHOD HTTP
>
> in the ADSM server options file in order to use the web admin (I was
mistaken
> in that I thought this was a default setting).
>
> Andy
>
> Andy Raibeck
> IBM Storage Systems Division
> ADSM Client Development
> e-mail: storman AT us.ibm DOT com
>
> ---------------------- Forwarded by Andrew Raibeck/San Jose/IBM on
03/24/98
> 08:51 AM ---------------------------
> From: Andrew Raibeck on 03/24/98 08:16 AM MST
>
> To: adsm-l AT vm.marist DOT edu@internet
> cc:
> From: Andrew Raibeck/San Jose/IBM @ IBMUS
> Subject: Re: Problem with ADSM try and buy.
>
> Whooooops, I forgot to add that the message problem (APAR IX73015)
shouldn't be
> a "show-stopper" problem.
>
> Andy Raibeck
> IBM Storage Systems Division
> ADSM Client Development
> e-mail: storman AT us.ibm DOT com
>
> ---------------------- Forwarded by Andrew Raibeck/San Jose/IBM on
03/24/98
> 07:15 AM ---------------------------
> From: Andrew Raibeck on 03/24/98 08:14 AM MST
> To: ADSM-L AT VM.MARIST DOT EDU
> cc:
> From: Andrew Raibeck/San Jose/IBM @ IBMUS
> Subject:  Re: Problem with ADSM try and buy.
>
> The "Error retrieving message 21329 for 1 fromEN_US" is a bug (APAR
IX73015).
> I'm not absolutely certain when this will be fixed, but it's likely
going to be
> in our next PTF.
>
> Regarding the ADSM Admin... is this the Admin GUI or command line
interface you
> are trying to run? In ADSM V3, there is no Admin GUI for AIX.
However, there is
> a web-based Admin built right in to the ADSM V3 server. Try pointing
your web
> browser to the machine that your server is running on and specify
the web admin
> port number. The default port number is 1580. For example, if the IP
address
> for your machine is machine1.yahoo.com, then you would set the URL to:
>
>      http://machine1.yahoo.com:1580
>
> Hope this helps,
>
> Andy
>
> Andy Raibeck
> IBM Storage Systems Division
> ADSM Client Development
> e-mail: storman AT us.ibm DOT com
>
>
>  ADSM-L AT VM.MARIST DOT EDU
>  03/24/98 06:48 AM
> Please respond to ADSM-L AT VM.MARIST DOT EDU
>
> To: ADSM-L AT VM.MARIST DOT EDU
> cc:
> Subject: Problem with ADSM try and buy.
>
> Hi,
>
>  I am trying to install ADSM V3.1 try and buy on an RS6000 running AIX
> 4.2.1.
>
> Whilst installing the server.rte package I got the following message;
>   ANR4693I Interface driver information will be loaded in quiet mode:
>    Only warning and error messages will be displayed.
>   Error retrieving message 21329 for 1 from EN_US.
>
> I continued with the installation and after setting up my .opt .sys
> files, I try to run the ADSM Administrative Client by clicking on the
> icon and I get the message (X2);
>  Error opening catalog adsmez.cat and message set 1.
>
> I am using LANG=en_US and have set MESSAGES and CULTRAL_CONVENTION to
> en_US.
>
> Thanks in advance for any help.
>
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>
>
>
>
>
>
>

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com