ADSM-L

Re: Library failure doing CHECKIN with tape process active

1998-03-19 18:20:33
Subject: Re: Library failure doing CHECKIN with tape process active
From: Bernie Survoy <bsurvoy AT OHIO DOT NET>
Date: Thu, 19 Mar 1998 18:20:33 -0500
Peter,
I was going through some old mail and came across this.  I have seen this
problem on AIX and HP servers.  If a checkin is issued with tapes in drives
doing other functions, occasionally ADSM looses track of the slot assignments
and stores the newly checked in tape in a slot that one of the running processes
is using.  This was fixed around PTF 15 or 16 on the platforms mentioned above.

Thanks,
Bernie

Peter Hough wrote:

> We have recently been experiencing problems with our ATL 2/28 library, and
> we have now spotted a pattern. It seems that if we CHECKIN a tape while a
> database backup or a process to backup a storage pool is active, the tapes
> used by the process cannot be successfully dismounted from the drive(see log
> below). The only solution is to manually dismount them and then audit the
> library, and in the meanwhile the library is unusable.
> We are running on NT4 with ADSM 2.1.12
> Has anyone else experienced this???
>
> 01/29/1998 18:51:31  ANR1210I Backup of primary storage pool BACKUPPOOL to
> copy storage pool COPYPOOLC started as process 242.
> 01/29/1998 18:51:31  ANR1210I Backup of primary storage pool TAPEPOOL to
> copy storage pool COPYPOOLC started as process 243.
> 01/29/1998 18:51:40  ANR1228I Removable volume AMR502 is required for
> storage pool backup.
> 01/29/1998 18:51:40  ANR8324I DLT volume AMR502 is expected to be mounted
> (R/W).
> 01/29/1998 18:52:14  ANR8422I CHECKIN LIBVOLUME: Operation for library
> AUTOLIB started as process 244.
> 01/29/1998 18:52:38  ANR8337I DLT volume AMR581 mounted in drive TAPE02
> (MT3.0.0.2).
> 01/29/1998 18:52:40  ANR8323I 109: Insert DLT volume AMR575 R/W into
> entry/exit port of library AUTOLIB within 60 minute(s); issue 'REPLY' along
> with the request ID when ready.
> 01/29/1998 18:53:25  ANR8427I CHECKIN LIBVOLUME for volume AMR575 in library
> AUTOLIB completed successfully.
> 01/29/1998 19:03:06  ANR1212I Backup process 242 ended for storage pool
> BACKUPPOOL.
> 01/29/1998 19:03:08  ANR1214I Backup of primary storage pool BACKUPPOOL to
> copy storage pool COPYPOOLC has ended.  Files Backed Up: 3151, Bytes Backed
> Up: 156692480, Unreadable Files: 0, Unreadable Bytes: 0.
> 01/29/1998 20:03:08  ANR8325I Dismounting volume AMR581 - 60 minute mount
> retention expired.
> 01/29/1998 20:03:12  ANR8336I Verifying label of DLT volume AMR581 in drive
> TAPE02 (MT3.0.0.2).
> 01/29/1998 20:03:59  ANR8300E I/O error on library AUTOLIB (OP=8401C058,
> CC=315, KEY=05, ASC=3B, ASCQ=0D, Description=The destination slot or drive
> was full in an attempt to move a volume).  Refer to Appendix B in the
> 'Messages' manual for recommended action.
>
> Peter Hough
> DataSave Services plc
<Prev in Thread] Current Thread [Next in Thread>
  • Re: Library failure doing CHECKIN with tape process active, Bernie Survoy <=