> >Does ADSM v2r1 support ATL DLT libraries with DLT4000 drives?
> >We need to increase our capacity and have been looking at
> >ATL 2/28 and 2/52 to replace our Quantum 4700s. Looking at
> >the README for the latest ADSM server for AIX, I see that
> >there is only support for DLT2000 drives with ATL libraries.
> >We need at least DLT4000 drives, at best DLT7000. Has anyone
> >tried using either 4000 or 7000 drives in an ATL library
> >with ADSM?
> =
> I'm pleased you raised this question as we are planning on buying
> a DLT tape library and the ATL 2/28 and 2/52 were leading contenders
> for us. I had assumed that the DLT4000 drives were supported for this
> as I had seen DLT 4000 drives recently added to a range of DLT
> libraries that are supported. Looking more closely at the most recent
> release READMEs I was disturbed to find that you were correct, in that
> although DLT 4000 drives are supported in ADIC Scalar, Breece Hill
> and TTi libraries, they are not in the ATL DLT range. Also the
> 2/52 doesn't specifically get a mention.
> =
> Have you got any responses to your query from IBM/ADSM or anyone
> else using these libraries ?
I've got three answers from people using ADSM with DLT4000 drives in
ATL libraries, two with 4/52 and one with 6/176 (none with 2/52). All =
three are pleased and has no problems with it. I've got no answers =
from people having problems with it.
> If not, it would be worthwhile if we could find out whether they
> intend to add support in the near future.
I hope they will. And while doing so, add support for DLT7000 drives
as well, since a 2/28 with DLT7000 drives has about the same capacity =
(and doubled transfer rate) as a 2/52 with DLT4000, the 2/28 with =
device module 2 and 28 DLT-IV cartridges and the 2/52 with device =
module 3 and 52 DLT-IV cartridges.
Anyone tried DLT7000 with ADSM yet? =
|