Here are some things to check:
1) Make sure all patches for Netware have been applied.
2) Make sure there's enough short term alloc memory:
SET MAXIMUM ALLOC SHORT TERM MEMORY = 16000000
3) Make sure server has enough cache buffers:
Using MONITOR.NLM look under resources. There you will
get a % value. That value should be over 50%.
______________________________ Reply Separator _________________________________
Subject: Re: Reply to RE: NETWARE 4.10 ADS
Author: Chuck Mattern <cmattern AT HomeDepot DOT COM> at InternetBWMail
Date: 8/15/96 7:23 PM
I'd check on how much memory the client has, I've seen this happen
when ADSM felt there was not enough to run but maybe just enough to
load. I've also seen him just flash across the screen and exit with
no meaningful output. And of course he took his screen with him when
he left so there was no chance for debugging. In all three cases
adding memory solved my problem.
Paul, did you ever figure this one out? We are having the same
problem. And we have found no work-around. We are using NetWare v3.
Julie Phinney
JULPHINN @ EMPHESYS.E-MAIL.COM
>We have a user here who is attempting to install & run ADSM on a NetWare
4.10
>server. I am not a NetWare person, so I'm hoping for some help.
>When the user tries to run ADSM, it simply hangs - no error messages and no
>entries in the log files. They can issue LOAD DSMC and get the >DSMC
>prompt, but when they try to run a command (e.g., INCR or QUERY SCH), it
>simply hangs.
>It's probably something simple, and I'm hoping someone can offer some
>suggestions as to what might cause this symptom.
---- End of mail text
--
---
---
Chuck Mattern "That which does not kill us, makes us stronger.."
Chuck Mattern "That which does not kill us, makes us stronger.."
Sr. Systems Engineer -Friedrich Nietzsche
cmattern AT homedepot DOT com The Home Depot, USA, Inc.
cmattern AT mindspring DOT com 2455 Paces Ferry Rd.
Atlanta, GA 30339-4024
770-433-8211 ext 84446
|
