To Adsm support center,

I intalled all fixed to support IBM 7331-205 cartridge library on Aix 3.2.5
I test my 7331-205 with taputil software from Atape software qho become
with 7331-205 unit.

In ADSM i do these commands :

     define library adsmlib-7331 device=/dev/lb0
     define drive adsmlib-7331 tape1 device=/dev/mt0 element=23
     define drive adsmlib-7331 tape2 device=/dev/mt1 element=24
     define devc adsmlib-7331 cartlib mountlimit=2 format=drive
 i define stg in adsmlib-7331 library, and two tape 8mm aix001 and aix002.

 I labeled my two cartridge with
        dsmlabel -drive=/dev/mt0,23 -drive=/dev/mt1,24 -library=/dev/lb0

 When i do Q libvol adsmlib-7331 in adsm i have no volume  in my list

Before Q libvol i do audit library adsmlib-7331, and i see that
the tape library Unit scan the tapes.

What is my problem....... I don't able to use Tape library correctly.


          Thanks to answer ......... Yves