Author: Wassim Hossari <whossari AT KFSHHUB.KFSHRC.EDU DOT SA>
Date: Wed, 14 Apr 1999 12:24:16 +0300
Hi everyone: We are using ADSM 3.1.1.0 on IBM R50 machine running AIX 4.2.1 to backup our network servers. Everything was going smooth and well for a long time until we decided to replace the 8mm tap
Author: missy lady <missy_lady AT HOTMAIL DOT COM>
Date: Wed, 14 Apr 1999 03:37:30 PDT
Are the errors of the type 0F78A011 0414041899 T H rmt1 RECOVERY LOGIC INITIATED BY DEVICE A7AB4C8F 0414041899 I H rmt1 TAPE SIM/MIM RECORD 0F78A011 0414041899 T H rmt6 RECOVERY LOGIC INITIATED BY DE
Author: Rui Malheiro <rmalheiro AT MAIL.TELEPAC DOT PT>
Date: Wed, 14 Apr 1999 10:56:17 GMT
Replying to: Wassim Hossari <whossari AT KFSHHUB.KFSHRC.EDU DOT SA> (Wed, 14 Apr 1999 12:24:16 +0300) I've had some problemas with a Magstar 3570 last year. The problem was that writes to tape would
Author: Wassim Hossari <whossari AT KFSHHUB.KFSHRC.EDU DOT SA>
Date: Wed, 14 Apr 1999 14:00:39 +0300
Hi Ciao: What we have at our establishment is a 3570 library, Model C12, with 2 drives. The problems that we are facing are mainly the following: 1- " Tension dropped " during unloading the tape from
Author: Wassim Hossari <whossari AT KFSHHUB.KFSHRC.EDU DOT SA>
Date: Wed, 14 Apr 1999 14:15:54 +0300
Hi, Yes, please advise because some of them are like that in addition to the following: 4865FA9B 0413020799 P H rmt1 TAPE OPERATION ERROR 4865FA9B 0413020799 P H rmt1 TAPE OPERATION ERROR and the det
Author: Wassim Hossari <whossari AT KFSHHUB.KFSHRC.EDU DOT SA>
Date: Wed, 14 Apr 1999 14:30:10 +0300
Hi Rui, Did you talk IBM into replacing the 3570 with another 3570 or another tape library model? because it seems that we are heading that way. The IBM CEs had tried replacing almost every part in t
Author: Rui Malheiro <rmalheiro AT MAIL.TELEPAC DOT PT>
Date: Wed, 14 Apr 1999 12:14:20 GMT
Replying to: Wassim Hossari <whossari AT KFSHHUB.KFSHRC.EDU DOT SA> (Wed, 14 Apr 1999 14:30:10 +0300) It was replaced by another 3570 last November. It was (is) a 3570-B12. Errors were the same as yo
Author: Rainer Tammer <Rainer.Tammer AT SPG.SCHULERGROUP DOT COM>
Date: Wed, 14 Apr 1999 17:13:42 +0200
Hello, upgrade your drive firmware / atape to the lates leves... this helped us a lot. Bye Rainer Tammer [Schuler Pressen GmbH & Co, Abt.: CWIS, Tel.: +49(7161)66-747]
Those are exactly the problems we also have in our environment. Do you have solutions for it ? with kind regards, / met vriendelijke groeten, Johan Pol Boerhaavelaan 11 - 2713 HA - Zoetermeer - Tel.
Hi I have had the same problem at a number of sites I support.. The solution appears to have been to upgrade the microcode to level I think it is c22 and the version of the ATAPE drivers to version 4
Author: "Blair, Ian" <iblair AT KILCOM1.UCIS.DAL DOT CA>
Date: Mon, 19 Apr 1999 11:57:07 -0300
We had similar serious problems. IBM replaced the library with a C model, which for 8 months has been excellent. Our old B was supposed to have gone to the lab. == == Robert IAN Blair, Systems Admini