Author: euphemia <bacula-forum AT backupcentral DOT com>
Date: Tue, 08 Jul 2014 01:27:04 -0700
Very informative thread, the bar code mentioned here also recalled me of the .net reading barcodes (http://www.businessrefinery.com/products/barcode_reader_net/main.html) from a barcode tool (http://
Author: euphemia <bacula-forum AT backupcentral DOT com>
Date: Thu, 24 Jul 2014 00:38:32 -0700
I myself also don't know why I came here to comment again on this thread, maybe the reviewing of the barcode tool (http://www.onbarcode.com/) triggered something in my emotion. Anyway, thanks again f
Hi Tim, I don't know about another application but bacula does correctly read the barcode labels during: update slots scan eg. below. But then it doesn't seem to be able to find it when I try to add
Author: "Clark, Patricia A." <clarkpa AT ornl DOT gov>
Date: Tue, 2 Oct 2012 13:30:17 -0400
The output below indicates that there is a bacula label on the tapes, otherwise you would receive and Input/Output error and a message about it not being a bacula labeled tape. I have run into this i
Author: John Drescher <drescherjm AT gmail DOT com>
Date: Tue, 2 Oct 2012 13:46:16 -0400
BTW, You should never run update slots scan if you have a barcode reader on your autochanger. Use update slots instead. John -- Don't let slow site performance ruin your business. Deploy New Relic AP
Hello, I'm having some issues with bacula. This is a new install, I have not used bacula before. So far I've successfully backed up from a client to a file on the bacula server, now I'm trying to get
W dniu 06.09.2012 00:37, Simon Tyler pisze: Hi, It means that probably there is problem with reading tape labels in slots 6 and 7. Are you sure that tapes in slots 6 and 7 have sticked correct labels
Hi Gani, Thanks for the response. [root@pmappp01 bin]# ./mtx-changer /dev/sg1 list 1:TPMBU011 2:TPMBU002 3:TPMBU001 4:TPMBU005 5:TPMBU007 6: 7: 8:TPMBU003 [root@pmappp01 bin]# mtx -f /dev/sg1 status
Hi Gani, I tried different tapes, and then tried an: update slots scan, but with the same results. I don't think it's the tapes, but they were used by previous backup software. Have I neglected to do
On Sep 14, 2012, at 5:41 PM, Simon Tyler wrote: Hi Gani, I tried different tapes, and then tried an: update slots scan, but with the same results. I don't think it's the tapes, but they were used by
Hi Dan, This worked but apparently for only one of the tapes. I took 2 tapes out to go to offsite storage, and put in 2 tapes that were previously used but only one of them is recognized. I feel as i
Hi everyone, I thought I would try to relabel tapes again when I had a chance to work without interruption, but I ran into much the same results. Here is the short version: - I checked that no jobs w
OK Hopefully I'm not annoying anyone with my updates. Here is the latest: I deleted the 5.2.6 install and installed 5.2.12, like so: backup the config files etc. delete all tapes by rewind, writing e
Author: Tim Krieger <tim.krieger AT neverblue DOT com>
Date: Fri, 28 Sep 2012 16:12:48 -0700
Hey Simon, The output from your status command is not returning the label information for the slots. Do you have another application that you can use to see if the autoloader is reading the barcode l