Author: "Reynier Perez Mira" <rperezm AT uci DOT cu>
Date: Mon, 19 May 2008 00:14:11 -0400
Hi, I setup I have Bacula configured. Now when I try bconsole I get this error: Connecting to Director 10.128.50.155:9101 19-May 00:03 bconsole JobId 0: Fatal error: bsock.c:129 Unable to connect to
Author: Bruno Friedmann <bruno AT ioda-net DOT ch>
Date: Mon, 19 May 2008 07:27:21 +0200
ps aux | grep bacula should you show 3 process. netstat should also show you 3 process. Try the bacula-dir -t to see any error in your conf which should break the starting. Otherwise, documentation +
netstat -a | grep 9101 netstat -a | grep bacula To determine if it is bound somewhere. If it is then just ensure that the bconsole knows where it is listening. LDB -- This SF.net email is sponsored b
Author: "Reynier Perez Mira" <rperezm AT uci DOT cu>
Date: Mon, 19 May 2008 09:54:25 -0400
Hi LDB and Bruno, Something is wrong here and I can't find where is the problem. I run: "bacula-dir -t -c /etc/bacula/bacula-dir.conf" and the config file haven't any error because it pass the test.
it is listening on the localhost interface, or the loopback .. look at mine: tcp 0 0 *:bacula-dir *:* LISTEN yours cannot be reached at all .. Have it bind to the interface or IP where it will render
Author: Piotr Gbyliczek <pg AT forlinux.co DOT uk>
Date: Mon, 19 May 2008 15:53:29 +0100
I would check if Director is still active - I saw it dying while it couldn't connect to database. But it seems that it's not that - so you need check bconsole.conf file, and SELinux settings - it is
Author: "John Drescher" <drescherjm AT gmail DOT com>
Date: Mon, 19 May 2008 10:58:43 -0400
What I meant is you will only be able to backup the bacula server. John -- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT
Author: "John Drescher" <drescherjm AT gmail DOT com>
Date: Mon, 19 May 2008 10:57:09 -0400
I suggest you remove localhost and 127.0.0.1 from your bacula config and replace these with the external IP address otherwise bacula will only be able to communicate with the bacula server. John -- T
Author: "Reynier Perez Mira" <rperezm AT uci DOT cu>
Date: Mon, 19 May 2008 11:12:29 -0400
Hi every, As John say I have this line in my bacula-dir.conf: DirAddress = 127.0.0.1. I change the value to 10.128.50.155 wich is the IP of this server machine, then I restart Bacula but I can telnet
Author: "John Drescher" <drescherjm AT gmail DOT com>
Date: Mon, 19 May 2008 11:20:16 -0400
On Mon, May 19, 2008 at 11:12 AM, Reynier Perez Mira <rperezm AT uci DOT cu> wrote: You need to telnet to port 9101 not 23. There should be an option in your telnet software for that. It is obviously
Author: "Reynier Perez Mira" <rperezm AT uci DOT cu>
Date: Mon, 19 May 2008 11:40:35 -0400
Thanks a lot, now it Works. I change the things as said in my last post and restart the server. Now running this: netstat -tulpen I get this output: Active Internet connections (only servers) tcp 0 0
The telnet command expects a space, not a colon, to separate the IP address and the port. Also note that your computer reacts and says that it can't connect on port 23 (the default telnet port), whic