Author: "Moyer, Joni M" <joni.moyer AT HIGHMARK DOT COM>
Date: Thu, 6 Oct 2011 10:52:13 -0400
Hi Everyone, I was trying to label a volume in a scsi library and I used the label libvol command to try and label Q00000 in the library NAS_QI6000 and it is failing. The tape is already physically i
Author: Erwann SIMON <erwann.simon AT FREE DOT FR>
Date: Thu, 6 Oct 2011 17:39:33 +0000
Hi Joni, I guess label libvol only works if the volume to be labeled is in the i/o station (bulk) in that kind of library. You'll may be able to use the autolabel option of the library. -- Best regar
Author: James Choate <jchoate AT CHOOSES1 DOT COM>
Date: Fri, 7 Oct 2011 08:53:16 -0500
How did tape Q00000 get into the library? Did you manually load a batch of tapes in this library without checking them in thru the bulk I/O? If that is the case, you can just checkin the tapes. You c
Author: "Moyer, Joni M" <joni.moyer AT HIGHMARK DOT COM>
Date: Wed, 12 Oct 2011 13:57:27 -0400
Hi, I've tried to do this and I'm now getting the following errors: 10/06/11 12:50:34 ANR0609I LABEL LIBVOLUME started as process 33588. (SESSION: 58343, PROCESS: 33588) 10/06/11 12:50:46 ANR2017I Ad
Author: James Choate <jchoate AT CHOOSES1 DOT COM>
Date: Wed, 12 Oct 2011 14:34:34 -0500
Joni, It doesn't look like your drives/paths are defined correctly. The library is trying to move the volume from a slot 4096 to slot-element 65535. In my experience, when I see slot element 65535, i
Author: "Strand, Neil B." <NBStrand AT LEGGMASON DOT COM>
Date: Wed, 12 Oct 2011 15:26:46 -0400
Joni, The SENSE information is described on page 78 of the Quantum SCSI Reference Guide for the Scalar i6000 byte code = description 0 -70 = Response Code 1 -00 = reserved 2 -05 = reserved or sense k
Author: Jerry Michalak <jerry_gjm AT YAHOO DOT COM>
Date: Wed, 12 Oct 2011 15:07:45 -0700
try show slots <library_name> in TSM to see the library info. Jerry Michalak jerry_gjm AT yahoo DOT com Hi, I've tried to do this and I'm now getting the following errors: 10/06/11 12:50:3
You probably want to pipe the output of SHOW SLOTS into a file, and then examine that file carefully. The output can be voluminous, but it can be very useful, so do it. You can also run the lbtest ut
Author: "Moyer, Joni M" <joni.moyer AT HIGHMARK DOT COM>
Date: Thu, 13 Oct 2011 08:20:15 -0400
Hi, I have a special sitation herewhere I define the library and library path to the TSM server. I also have the lto4 drives defined to the TSM server, but then I have the drive paths defined to my 3