Problem with Library

[MrTSM]

I have a problem with Library because drive have path ok but library's status is unknown, and I can't redefine path or delete drive.

Nombre de biblioteca Nombre de unidad Tipo de dispositivo Activado

IBM3573 DRIVE_1 LTO Sí
IBM3573 DRIVE_2 LTO Sí
IBM3573 TSM_SERVER1 UNKNOWN Sí

Thank you very much for your answers,

Regards.

[LED888]

Is there a path for the library?
In the TSM Server activity log, what message do we see when we try to use the library?

Via the OS, can it see the library and drives?


Good Luck,
Sias

[thestorageagent]

Are you using the IBMtape drivers?

[MrTSM]

Yes of course, and it exist path to library, that OS view drives and library. But if I update state to activated not work.

Thank you.

[LED888]

Ok.. Within the TSM Server the library for the path exist.

In the TSM Server activity log, what are the error messages that we see when we try to access the tape library?

From the OS we see the library and the drive.

Basic troubleshooting steps for library and tape drives in Windows
http://www-01.ibm.com/support/docvie...id=swg21393009

Of course when I need it I can not find it.
There is another techdoc for "Basic troubleshooting steps for library and tape drives in AIX".

Since the os see the library and the drives, but the library is unknown within the TSM Server.

1. Power down the tape library, halt the TSM Server application.
If the TSM Server is hosted on a Windows system, once the TSM Server is halted, power down the system.
2. Power up the library.
3. Once the library complete its power, then restart the TSM Server.
If the TSM Server is hosted on Windows, power up the system and restart the TSM Server.

Good Luck,
Sias

[MrTSM]

Thank you for your answers I reset SO, reset tape library, delete every path and redefine that LED888 indicates in post and it Works OK.

Regards and thank you for all.