I have a TSM server that currently has two TS3200 libraries attached via Fibre card that work fine.

I have been given another TS3200 library that has only a scsi port (no Fibre). I added a 5712(5702) scsi HBA to my server and connected the new library to it. I then updated the TS3200 firmware to the latest level and then uninstalled and reinstalled the lin_tape driver. I restarted the TSM server and the TS3200 library. Unfortunately, the library is not recognized. Can anyone tell me what else I need to do to get Linux to recognized this tape device. (i suspect this is a driver issue)

Info. I know the HBA is recognized by linux. lsslot shows this.
U787B.001.DNWB91C-P1-C4 Logical I/O Slot 0000:00:02.4 pci1069,b166

lsscsi shows the libraries that work, but not the tape library i have added.
root@gurgle ~]# lsscsi
....
[0:1:15:0] enclosu IBM VSBPD4E2 U4SCSI 5880 -
[0:255:255:255]no dev IBM 5702001 0150 -
[1:255:255:255]no dev IBM 5702001 0150 -
....
[5:0:0:0] tape IBM ULT3580-TD4 A239 -
[5:0:0:1] mediumx IBM 3573-TL 9.20 -
[5:0:1:0] tape IBM ULT3580-TD4 A239 -
[5:0:1:1] mediumx IBM 3573-TL 9.20 -
[6:0:0:0] tape IBM ULT3580-TD4 A239 -
[6:0:1:0] tape IBM ULT3580-TD4 A239 -