backup netapp NDMP node with TSM...failure

[combato]

TSM rel. 6.2.2

Pro’s,

I try to backup a part of a netapp (nearstore) volume with TSM NDMP. The volume is 6 TB and the actual data size of the volume is 700 GB. The problem I have is that the backup process now have backed up over 10 TB of data. How can this be possible?
If I check the volumes that TSM have used so far, there are no qontent on the volumes. Does anyone know how NDMP backup from a netapp works and shall be setup? Below you can see how I’ve setup my site…

SETUP OF NDMP DUMP:
tsm: CORPBCK4250>q node t=nas

Node Name Platform Policy Domain Days Since Days Since Locked?
Name Last Acce- Password
ss Set
------------------------- -------- -------------- ---------- ---------- -------
STORRY.XXX.XXXX.XX NetApp NDMP 4 11 No

tsm: CORPBCK4250>q datamover

Data Mover Name Data Mover Type On-Line
------------------------------- --------------- -------
STORRY.XXX.XXXX.XX NAS Yes

tsm: CORPBCK4250>q vitualfs
ANR2000E Unknown command - QUERY VITUALFS.
ANS8001I Return code 2.

tsm: CORPBCK4250>q virtualfs

Node Name Virtual Filespace Filespace Path Hexadecimal Path?
Mapping Name Name
--------------- --------------------- ----------- ------------------------- -----------
STORRY.XXX.XXXX.XX /orabackup /vol/storry_sbd_vol1 /.snapshot/orabackup_kvart No

START OF THE NDMP BACKUP:
tsm: CORPBCK4250>Backup node storry.xxx.xxxx.xx /orabackup mgmt=sbd_10_years toc=yes mode=full

AFTER 5 DAYS OF BACKUP:
tsm: CORPBCK4250>q pr

Process Process Description Status
Number
-------- -------------------- -------------------------------------------------
11 Backup NAS (full) NAS Node STORRY.XX.XXXX.XX, Source /orabackup,
Bytes Moved 10,052,066,314,240, Estimated 99%
Completed with Data Movement, Estimated 0%
Completed with table of contents Creation,
Elapsed Time 316494 seconds. Current output
volume(s): 000688L4.
51 Backup Storage Pool Primary Pool TAPEPOOL, Copy Pool TAPECOPY, Files
Backed Up: 231, Bytes Backed Up:
561,836,968,387, Unreadable Files: 0, Unreadable
Bytes: 0. Current Physical File (bytes):
10,486,779,191 Current input volume: 000748L4.
Current output volume(s): 000730L4.

tsm: CORPBCK4250>q vol stg=sbdtapepool

Volume Name Storage Device Estimated Pct Volume
Pool Name Class Name Capacity Util Status
------------------------ ----------- ---------- --------- ----- --------
000572L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000675L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000681L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000688L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000698L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000710L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000733L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000740L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty
000762L4 SBDTAPEPOOL LTOCLASS 0.0 M 0.0 Empty

tsm: CORPBCK4250>q cont 000572L4
ANR2034E QUERY CONTENT: No match found using this criteria.
ANS8001I Return code 11.

BELOW, STAT TO VIEW THAT THE NETAPP VOLUME IS 6 TB :
storry*> vol size storry_sbd_vol1
vol size: Flexible volume 'storry_sbd_vol1' has size 6t.
storry*>

/C

[Harry_Redl]

Hi,

show us (from NetApp)
df -h storry_sbd_vol1
df -sh storry_sbd_vol1

Harry

[combato]

Hi,

Somehow... the volume I ran the backup command on has increased dramatically since I started the backup. I think I was little bit to quick to post this question...

But I have one remaining question:
Why can't I see any data when I type "q cont VOLNAME" ? Does the backup need to finish before I se the data on the allocated tapes?

Output from my netapp:

storry*> df -h storry_sbd_vol1
Filesystem total used avail capacity Mounted on
/vol/storry_sbd_vol1/ 6144GB 4805GB 1338GB 78% /vol/storry_sbd_vol1/
/vol/storry_sbd_vol1/.snapshot 0GB 483GB 0GB ---% /vol/storry_sbd_vol1/.snapshot
storry*> df -sh storry_sbd_vol1
Filesystem used saved %saved
/vol/storry_sbd_vol1/ 4805GB 7191GB 60%

/C

[Harry_Redl]

Hi,

from the output you provided it is obvious - you are using deduplication, so the volume is 6TB in size, but contains 4805+7191=11996GB.
Yes, backup of the given object (in any backup/archive mode) must be completed before it appears in "q content".

Harry

[inestler]

In a case of a complete restore you have to have a 12TB+ volume available.

[thiago2d]

friend,

The first is FULL NDMP backup, the total size allocated on the server, not used. If you have only 6 TB allocated it will not do 10 TB backup, use the command "q fi storry.xxx / orabackup" to know the actual size allocated.