Results 1 to 7 of 7
10-27-2010, 06:08 AM #1
- Join Date
- Apr 2008
- Thanked 0 Times in 0 Posts
Communication betweenTDP-node(target node) and local DSMAGENT(Agent node)
I'm backing up multiple Exchange 2010 servers with Data Protection for Microsoft Exchange Server, using VSS.
After a bit of fiddeling I have no problem setting this up.
However one of my servers have a special network configuration:
I dont want the backup traffic to congest the network, so I have set a local route to the backup network:
Network Address....Netmask...............Gateway Address....Metric
exch01.temp.com is given a external IP in the backup network. 10.5.5.21.
The problem arises when the TDP-node(target node) tries to contact the local DSMAGENT(Agent node) through CAD.
I'm getting this error message:
ACN0520E Failed to connect to Local DSMAGENT Node 'TEMP-EXCH01' at address:port '10.5.5.21:1581'.
Verify that the TSM Client Acceptor Daemon (CAD) is installed, configured, and running properly.
Does anybody know if it is posible to force the TDP-node(target node) to contact the local DSMAGENT(Agent node) on a spesific IP?
Where does it get this info in the first place? It seems it must be from the backup-server since it is the only server that is aware of the backup-network.
I am not able to find much documentation on CAD, so any contribution is welcomed.
By rico in forum Backup / Archive DiscussionReplies: 3Last Post: 12-29-2011, 02:58 AM
By jfbelmar in forum TSM ServerReplies: 5Last Post: 12-29-2009, 11:51 AM
By ntenz in forum TSM ServerReplies: 8Last Post: 09-18-2008, 03:26 PM
By zkowalik in forum Backup / Archive DiscussionReplies: 2Last Post: 03-20-2006, 04:37 AM
By kabousv in forum TDP/Application Layer BackupReplies: 0Last Post: 02-11-2005, 03:48 AM