Results 1 to 7 of 7
-
08-27-2010, 08:56 AM #1Senior Member
- Join Date
- Oct 2003
- Location
- Stuttgart, Germany
- Posts
- 340
- Thanks
- 2
- Thanked 3 Times in 3 Posts
TS3500 killed with wrong firmware?
Hi
I guess I have a problem now...
After updating drive microcode to the latest level I wanted to update the library firmware too.
Fortunately we currently have one unused library where I wanted to test the update... I guess you already sense what i did.
It is a non-ALMS-library and I loaded firmware level A360. Well done me dimwit
Now it does not even respond to a ping! Is there any way to fix this myself?
-
08-27-2010, 09:09 AM #2Moderator
- Join Date
- Aug 2005
- Location
- Somewhere in the US
- Posts
- 5,297
- Thanks
- 2
- Thanked 137 Times in 135 Posts
I am guessing you tried rebooting the library, right?
Have you verified that the IP Addresses have not changed because of the update?
By the way, did you use the panel to update the firmware, or used the web interface? I think you can undo the update by putting back the old firmware using the panel.Ed
-
08-27-2010, 09:26 AM #3Senior Member
- Join Date
- Oct 2003
- Location
- Stuttgart, Germany
- Posts
- 340
- Thanks
- 2
- Thanked 3 Times in 3 Posts
Thank you for the answer. I turned it off and on. The display only says "Error 2701. Unable to communicate with ACC card."
Its MAC is visible on the LAN switch, but does not perform any requests. My colleage will look again on monday
Edit: Error No. is 2701
The machine is not reachable over LAN, I will try to see something on the serial port...Last edited by Sunhillow; 08-30-2010 at 06:11 AM.
-
08-30-2010, 07:55 AM #4Senior Member
- Join Date
- Oct 2003
- Location
- Stuttgart, Germany
- Posts
- 340
- Thanks
- 2
- Thanked 3 Times in 3 Posts
OK... the only way to connect to the library now seems to be CEtool which apparently can only be downloaded by IBM CE. At least the download address mentioned in the Maintanance Information of Nov. 2008 is unreachable
-
09-06-2010, 04:33 AM #5
-
04-12-2012, 09:32 AM #6Newcomer
- Join Date
- Dec 2010
- Location
- Germany / Cologne
- Posts
- 6
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Hi Sunhillow,
did you get a result? We have the same issue here.
-
04-12-2012, 12:25 PM #7Senior Member
- Join Date
- Apr 2007
- Location
- Oslo, Norway
- Posts
- 241
- Thanks
- 2
- Thanked 17 Times in 17 Posts
You probably have old hardware revisions of your cards, IBM did the same thing on my TS3500. We had to replace the acc card to get it working, Later we replaced all cards to newer hardware revisions.
-= Trident =-
Similar Threads
-
TS3500 (TS3584) Firmware Update
By GregE in forum Tape / Media LibraryReplies: 2Last Post: 05-20-2009, 12:27 PM -
upgrading firmware on DS4400, Never done it before
By PierCed_3 in forum SAN Technical DiscussionReplies: 1Last Post: 02-05-2009, 11:17 AM -
Upgrade to 5.4.3.2 has killed our DISK performance
By dev1 in forum TSM ServerReplies: 1Last Post: 07-31-2008, 12:11 PM -
Killed Netware-Volume through backup with Windows 98SE
By kirchner in forum Backup / Archive DiscussionReplies: 0Last Post: 09-14-2006, 10:27 AM -
LTO2 firmware issues
By matthias in forum Tape / Media LibraryReplies: 4Last Post: 07-13-2004, 01:17 PM


Reply With Quote
