Silkworm 3800 - reboot cycle

[KaTeSTER]

Hi!

I have taken over care of a Silkworm 3800 FC Switch, after it had been shelved for a couple of years. I'm kinda desperate here...

The switch keeps cycling in a reboot loop.
The onboard diagnostics at bootup get succesfully finnish the Loopback test, reboot occurs at attempting "Spin Silk"
At this time there are no Fibrechannel devices connected.

here is an output of the log of the reboot, the issue mentioned in the log about the netmask i have resolved in the meantime.
(current setting is 192.168.7.78:ffffff00)

An excerpt of a Serial connection Log is at the end of this mail (after closing commentfile)

Any help is apreciated!

regards

[Stephan]

Maybe a firmware issue? Is the firmware correctly loaded on both partitions? I hope you found your issue, since this is a 2 month old post...?