Search:

Type: Posts; User: rdemaat

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Ok. Thanks to both for your input. Working with...

    Ok. Thanks to both for your input. Working with TSM level 2 now. They are having us do traces, rebalance, and reduce commands. Not sure this will fix the problem though. Whats disconcerting is the...
  2. TSM database across multiple volumes with very small free space on some of them

    Apologies right up front for this long explanation / question. We have had to extend our database over the years to where it is spread over 5 volumes / drive letters. Way back (a few years) before...
  3. Hey all, I found a hit, see below, in a different...

    Hey all, I found a hit, see below, in a different forum. This worked. I did:

    CHECKIN LIBV TS3310 500055L4 CHECKL=BARCODE STATUS=PRIVATE
    UPD V 500055L4 ACCESS=READO
    MOVE DATA 500055L4

    Move...
  4. VAULT tape needs to be checked in and copied. How do I do that?

    Hello, I have a tape that is in VAULT status with maybe a couple hundred files on it. A MOVE DATA or reclamation on this tape gets an IO error on the 'inhouse' tape that is used to get the data. So I...
  5. Replies
    10
    Views
    853

    Thank you! I ran the scripts. Looks good. They...

    Thank you! I ran the scripts. Looks good. They list the 'file' disk mounts too. I will try tweaking it to eliminate those and add a total. Dont tell me ! I'll see if I can figure it out and let you...
  6. Replies
    10
    Views
    853

    Well the sample I took was for 24 hours so that...

    Well the sample I took was for 24 hours so that would be all the typical TSM processes. Migrates, pool backups to tape, there are always 4 identify dup's running, space reclaims, etc, etc.. Looking...
  7. Replies
    10
    Views
    853

    So how do you get a legitimate count of tape...

    So how do you get a legitimate count of tape mounts?
  8. Ok. Looks like you are correct. Here's a partial...

    Ok. Looks like you are correct. Here's a partial from the select summary command:

    START_TIME : 2013-11-06 10:00:05.000000
    END_TIME : 2013-11-06 10:00:11.000000
    ACTIVITY : BACKUP...
  9. Replies
    10
    Views
    853

    Here's the output from Q DEVCL LTO4 F=D. No...

    Here's the output from Q DEVCL LTO4 F=D. No reference to idle time. Something to do with 'Mount Wait' or 'Mount Retention' ?


    q devcl lto4...
  10. Replies
    10
    Views
    853

    I'm not doing colocation. And I'm not sure about...

    I'm not doing colocation. And I'm not sure about tape idle time being zero. You mean when you do a Q MOU and you see some tapes/drives as 'IDLE' ? Meaning tape idle time is not zero? I do see IDLE...
  11. Replies
    10
    Views
    853

    To many activity='TAPE MOUNT' from summary

    Hello all, could someone explain why I see thousands of entries for the following select? The output shows a TAPE MOUNT almost every second. I can maybe see entries this often if it were for disk...
  12. Hello again, this script has been working fine...

    Hello again, this script has been working fine but now I have a question about what stats its actually showing me. I have an interest in seeing all the 'bytes transferred' on a daily basis (or 5pm to...
  13. Replies
    9
    Views
    998

    Yup. Here's the last few lines: ...

    Yup. Here's the last few lines:

    Number of TDP for WAS in use: 0
    Number of TDP for WAS in try buy mode: 0
    Is IBM System Storage Archive Manager in use ?:...
  14. Replies
    9
    Views
    998

    Ok. This is probably a real basic question but...

    Ok. This is probably a real basic question but how do I know if DRM is in use? This may be related. This site has had some Korn shell scripts in place for a long time that do the daily TSM stuff....
  15. Replies
    9
    Views
    998

    Yes, expire runs maybe not daily but close.

    Yes, expire runs maybe not daily but close.
  16. Replies
    9
    Views
    998

    Here's the Q DRM entry for the tape listed above....

    Here's the Q DRM entry for the tape listed above.

    AA2525L4 Vault 08/15/2013 07:08:02
  17. Replies
    9
    Views
    998

    Database backup volumes not going away.

    Hello all, I have a question about database backup volumes. This is for a TSM 5.5.6 system.

    I do a q drmstatus and see this:

    Recovery Plan Prefix: C:\DRPLAN\
    Plan Instructions Prefix: ...
  18. Replies
    2
    Views
    848

    Found it. Had to run the setup that created an...

    Found it. Had to run the setup that created an installation folder which had a zip file which has the .bat file in it.
  19. Replies
    2
    Views
    848

    CD base code package - CZB1QML

    Hi all, we are trying to get bare metal restore going. There is a step that says to insert your base code package CD. Where can we get an image of this CD? This is the CD that has the...
  20. Hi all, removing and reinstalling the TSM...

    Hi all, removing and reinstalling the TSM components on the client server did the trick. So something during the first install must have been missed. Efim, thanks for replying.
  21. ANR8214E Session open with xxx.xx.xxxx.xxx failed due to connection refusal

    Hi all, I have a new node defined. Trying to run a scheduled backup. cant get past the above error. Initially the client OPT file had TCPPORT set to 1500. But using netstat -na | find "LISTEN" the...
  22. Replies
    12
    Views
    2,697

    Here's my script with everything in place. I have...

    Here's my script with everything in place. I have 8 different flavors each one with a different 'order by'. One thing I could add (I think i saw sample code somewhere) is to add 1 to the fields that...
  23. Replies
    12
    Views
    2,697

    Yup...thats what I was looking for! You are good!...

    Yup...thats what I was looking for! You are good! And you beat me to the wait time field too! My version would have been a bit more complicated. I was going to do another CASE WHEN ELSE dividing...
  24. Replies
    12
    Views
    2,697

    Hi again, may be testing the limits on this one. ...

    Hi again, may be testing the limits on this one. Here's the script so far:

    select client_name, session_id, state, -
    wait_seconds as "Wait Time", -
    substr(cast((start_time) as char(29)),1,10) as...
  25. Replies
    12
    Views
    2,697

    Sweet! Thank you!

    Sweet! Thank you!
  26. Replies
    12
    Views
    2,697

    Ok. Thanks. Here's another challenge, at least...

    Ok. Thanks. Here's another challenge, at least for me. In this same script can I get it to display bytes received as xxx K, or xxx M, or xxx G, or xxx T depending on the number? Like the Q SE ...
  27. Replies
    12
    Views
    2,697

    Ok. Thanks. But could you uh 'translate' ...

    Ok. Thanks. But could you uh 'translate' :redface: that tanslate statement please? Mainly the '________abcdef______' part but the whole thing would be nice. Thanks.
  28. Replies
    12
    Views
    2,697

    Here's the answer: :smile: select client_name,...

    Here's the answer: :smile:

    select client_name, session_id, state, -
    substr(cast((start_time) as char(29)),1,10) as "Start Date", -
    substr(cast((start_time) as char(29)),12,8) as "Start Time", -...
  29. Replies
    12
    Views
    2,697

    Format HH:MM:SS field

    Hello all, I have this script that is working except that in the hours, minutes and seconds fields when any of them have a leading zero the zero gets dropped. For instance: if a session has been...
  30. The answer to this ended up being a firmware...

    The answer to this ended up being a firmware upgrade to the TS3200 library. Thanks Tiger22 for your input.
  31. ok. I have the tech going back in. What about the...

    ok. I have the tech going back in. What about the 'Restore Factory Defaults' option. Reading about that in the manual it sounds kind of drastic. Is it? Should we try that? The tech suggested doing...
  32. Oh. And the 3 IO slots are still not visible /...

    Oh. And the 3 IO slots are still not visible / usable. Still cant check the ENABLE option.
  33. Ok. We did a reboot. Didnt change anything. But...

    Ok. We did a reboot. Didnt change anything. But we did move (via the gui) the cleaning tape from its original slot, slot 12, to one of those *RES* slots. That got rid of a couple errors on the GUI...
  34. Yes. Admin / secure

    Yes. Admin / secure
  35. TS3200 I/O station disabled and 4 reserved slots in the wrong spot

    Hello, I have a new TS3200 that was just installed. Actually just the frame/robot is new. We used the old tape drives. Its a 4U so it has 48 slots. 44 for data. 3 for the IO station and 1 for the...
  36. Yes it is working now. Perfect! Thank you!

    Yes it is working now. Perfect! Thank you!
  37. Oh. 6.2.4 is the TSM version on a Windows 2003...

    Oh. 6.2.4 is the TSM version on a Windows 2003 server
  38. Ok. i copied the code from this thread to 2 new...

    Ok. i copied the code from this thread to 2 new scripts and ran them a few times in a row. Results below. The archive total changes and so do the totals numbers. :(

    I think the previous activity...
  39. Ok. Here is the output and the code. As you will...

    Ok. Here is the output and the code. As you will notice I created TSM scripts that contain the code. I cut and pasted from there to below along with a cut and paste of the output. My comments are in...
  40. Ok. I have tried this totals code. it must be...

    Ok. I have tried this totals code. it must be interpreting the time logic different. the total it comes up with doesnt match all the individual totals from the first select. and it keeps changing as...
  41. YES !!!! Thank you !!! Any chance that a total...

    YES !!!! Thank you !!! Any chance that a total GBs could be displayed also?



    ACTIVITY the last 5pm to 5pm time frame
    GBs processed


    ARCHIVE
    3265.27
  42. Replies
    3
    Views
    401

    Hi Harry, yes you are correct. "Define volume...

    Hi Harry, yes you are correct. "Define volume diskpool \\ipaddressofbuffalo\tsmbackup\test.dsm formatsize=10000 " worked. A backup was then run to diskpool and it ran just fine. Thanks for...
  43. Replies
    3
    Views
    401

    Buffalo device used as a storage pool...?

    Does anyone know if its possible to get a Buffalo device assigned to the Windows OS so you can then define a storage pool and volumes to it? I'm pretty sure that me just network mapping a drive...
  44. SQL start_time syntax -2 days and start at 5pm for 24 hours

    I found this select to list all activity in the last 24 hours. But I would like it to go back 2 days and start at 5pm for 24 hours. Preferably using -2 to go back two days instead of supplying an...
  45. Replies
    2
    Views
    2,008

    TSM TDP for Exchange download

    Hello all, is there a download spot to get the TSM TDP for Exchange client software?
    Running TSM 5.5.6 on a Windows 2003 server. Thanks!
Results 1 to 45 of 67
Page 1 of 2 1 2