Type: Posts; User: treds
Search: Search took 0.00 seconds.
I have a tsm admin schedule setup that does a daily check, it also does a backup of the database to tape but also another copy to disk.
I want to modify the path to where the disk copy is...
Thanks for the response.
i am getting lots of errors on my disk storage pools. Can i run a audit and fix like you can on tapes ( not that i have ever had much luck with that)
Example of error below.
thanks that sorted it
got that one to delete by making on site but this one wont delete
VOLUME h00338l3 discard=yes (SESSION: 4454)
08/05/13 16:03:28 ANR1425W Scratch volume H00338L3 is empty...
ANR2017I Administrator RTREDWAY issued command: DELETE
VOLUME h01481l3 discard=yes (SESSION: 4454)
08/05/13 15:55:26 ANR2017I Administrator...
delete vol ho1481l3 discard=yes
this returns a error code of 14 ANS8001L
it shows the volumes but i have not got those tapes
I have TSM 6.2.2 running on redhat, that has some old storage pools that i want to delete. Problem is we have some old tapes that have gone missing that are in those pools. So of course it wont...
We are having lots of issues with Tape drives on our TS3500 tape library. We are constantly getting drives going offline and tapes are accumulating errors.
IBM are very conveniently telling us...
I have a node that i want to ensure all backup data is deleted but archive is retained.
I am running 6.2 TSM on linux.
From the gui i have down a delete of backup data . But if i do a display...
TSM version 6.1 Linux redhat
Two servers that was in our exiting tsm sept ups have had to be rebuilt. i am now trying to add them back as new nodes ( removed the originals)
when i try to log on...
I have noticed that tapes have being going to read only, then i have been resetting them to RW
its set to 4
tsm: TAG_TSM1>q drive 3584lib drive01 f=d
Library Name Drive Name Device Type On-Line Read Formats Write Formats Element Drive State Volume Name Allocated to...
I have a storage pool where the tapes are not being used to the capacity of the volume
H03687L5 FILE_ONSITE LTO5CLASS 3.0 T 0.6 Filling
thanks a lot worked at treat
have attached output
get the following error in act log and it does not run at all.
05/29/2012 12:08:33 ANR0984I Process 70 for MIGRATION started in the
as requested please not had to use lto5class not ltoclass5
tsm: TAG_TSM1>q dev ltoclass f=d
Session established with server TAG_TSM1: Linux/x86_64
Server Version 6, Release 2,...
I want to ran a reclaim from this storage pool
Storage Pool Name: FILE_ONSITE_OLD
Storage Pool Type: Primary
We have recently upgraded all our drives from LTO3 to 5.
As you can still read the LTO3 i wanted to do a slow migration of the storage pools.
I was under the impression that i could set a...
seems if you delete a library you must checkin in all the scratch the private tapes manually first.
A audit of the library does not pick them up
[root@TAG-475 by-id]# ls -la /dev/IBM*
crw-rw-rw- 1 root root 250, 2048 May 25 10:06 /dev/IBMchanger0
crw-r--r-- 1 root root 250, 3071 May 25 10:06 /dev/IBMtape
crw-rw-rw- 1 root root 250, 0...
yes the last two drives error when trying to define path, these are drives that have been moved in the library
define path TAG_TSM1 drive11 srctype=server desttype=drive library=3584lib...
tsm: TAG_TSM1>q drive f=d
Library Name: 3584LIB
Drive Name: DRIVE01
Device Type: LTO
tsm: TAG_TSM1>q library f=d
Library Name: 3584LIB
Library Type: SCSI
tsm: TAG_TSM1>q path
Source Name Source Type Destination Destination On-Line
----------- ----------- ----------- ...
libary and tsm have been rebooted. we can see all the devices in /dev. Not sure about the library serial number or how to check its changed
output of the
tsm: TAG_TSM1>q drive
IBM Tivoli Storage Manager
Command Line Administrative Interface - Version 6, Release 1, Level 0.0
(c) Copyright by IBM Corporation and other(s) 1990, 2009. All Rights Reserved.
it does not run i dont think its picking up the library name. correctly
we have just added more drives to our TSM solution. To access the new drives we had to delete the old and the TSM library and re add.
every has added back fine but i can not audit the library...
this is a new node/file system.
But i did as you suggested and run the trace but nothing i backup sets a encryption flag on.
Is there anything else i can try?
Have added that but still not asked for a password when i do a manual backup through the BACLIENT and when i restore i am no asked for a password. The way i understood that you set this...
HI i am trying to add software encryption to my backups from one of the clients.
i have added the entries into the dsm.sys but don't seem to be able to set a password.
HI Chad no i am not breaking the lines
this is really strange. I am running 6.2 linux. If i copy and paste into a window running dsmadmc it works fine.
But if i generate a new script in TSM_STUDIO and run it does not work it...
Sorry forgot to put the error up
tsm: TAG_TSM1>run last_night_mb
ANR0162W Supplemental database diagnostic information: -1:42601:-104 ([IBM][CLI Driver][DB2/LINUXX8664] SQL0104N An...
tried that Trident and it error
SELECT cast(entity as char(22)) AS "Node name", CAST(sum(bytes/1024/1024) AS decimal(8,2)) AS "GB xfer", timestampdiff(8,char(end_time-start_time)) as...
I have the following script that i run each morning, i would like to modify so it presents the results in MB not GB, can some one telll me what i ned to change.
Thanks in advance
I have some tapes in pending which i what to delete so i can reclaim as scratch. But i keep getting a error
I have tried checking the tapes out then deleting but that still does not work
we are on latest patch level
still cant get a full backup
10/21/2011 01:59:25 ANS1030E The operating system refused a TSM request for memory allocation.
10/21/2011 01:59:25 --- SCHEDULEREC...
We have just upgraded to TSM 6 Linux Red hat
we are having lots of failures backing up our GPFS envoriment. We are getting errorrs like this
10/08/2011 02:28:56 ANS4007E Error processing...
Server Version 5, Release 5, Level 4.0
Linux/x86_64 (Red Hat Enterprise)
Issue: I need to ensure the client schedule starts on boot up of server automatically.
Currently if server is...
Results 1 to 45 of 165