Search:

Type: Posts; User: Harry_Redl

Page 1 of 12 1 2 3 4

Search: Search took 0.02 seconds.

  1. Hi, yes, TSM can restore directly from...

    Hi,

    yes, TSM can restore directly from copypool - but the owner TSM of the volume is the source server which must be up.
    What I had in mind was that in scenario a) (virtual volumes) you need...
  2. Hi, there are two ways I can see here - both...

    Hi,

    there are two ways I can see here - both need one server with the FC connection to the library. You have to set the server-to-server communication.
    a) using "TSM Virtual volumes" - define the...
  3. Hi, 2 cents question(s) - does this happen for...

    Hi,

    2 cents question(s) - does this happen for every storagepool or just that one? Primary or Copy storage pool? Can we see "q stg XYZ f=d", "q dri", "q path" and "q devc" outputs?

    Harry
  4. Replies
    6
    Views
    258

    Hi, well - I cannot recommend you deleting...

    Hi,

    well - I cannot recommend you deleting anything until I see the outputs. What you can do is to RENAME the "offending" filespace. Using SELECT command from the server side combined with the...
  5. Replies
    6
    Views
    258

    Hi, how does the "q files" look from the dsmc,...

    Hi,

    how does the "q files" look from the dsmc, what was the path to the NFS mountpoint? Maybe you are looking into wrong filespace (overlapping filespaces problem).

    Harry
  6. Replies
    6
    Views
    258

    Hi, that's weird - I have just tried Linux web...

    Hi,

    that's weird - I have just tried Linux web client and I can see the NFS partition files for restore.
    Can you check using the cmdline client (dsmc)?

    Harry
  7. Hi, update the paths - "upd path...

    Hi,

    update the paths - "upd path prd-srv-tsm_server1 drive01 srct=server destt=drive libr=ts3310 onl=yes" - for each drive

    Harry
  8. Hi, it's a good thing - you need both "drives"...

    Hi,

    it's a good thing - you need both "drives" and "paths" being online - it had to be checked.
    So put the paths online.

    Harry
  9. Hi, check the visibility of the library and...

    Hi,

    check the visibility of the library and the drives in the OS, update the paths to the drives to "online", check the drives for being online as well (use "q drive")

    Harry
  10. Replies
    14
    Views
    628

    Hi, seems the volhist discrepancy was the root...

    Hi,

    seems the volhist discrepancy was the root of the cause - but still check this link - without the same levels on both sides the DB restore MAY work - but for the real DR stick with the same...
  11. Replies
    14
    Views
    628

    Hi, is the TSM server version used to create...

    Hi,

    is the TSM server version used to create the DB Snapshot (the source server) the same as the server of the DR test machine? (are both 6.3.4.0?)

    Harry
  12. Replies
    6
    Views
    639

    Hi, well - depends on the amount of files and...

    Hi,

    well - depends on the amount of files and the volumes - what about searching the content of the primary SAP stgpool volumes checking whether or not the file has a copy (hope you only have one...
  13. Replies
    6
    Views
    639

    Hi, what about querying the occupancy on...

    Hi,

    what about querying the occupancy on filespace level? You should get a number for primary and copy storage pool ...

    Harry
  14. Replies
    3
    Views
    773

    Hi, check "qtree status" on the NetApp filers...

    Hi,

    check "qtree status" on the NetApp filers - the volume security style is probably "unix" instead of "ntfs". Changing the security style may affect user access - so know what you are doing.
    ...
  15. Hi, this error message can be normal...

    Hi,

    this error message can be normal
    http://www-01.ibm.com/support/docview.wss?uid=swg21640472

    Can you show us the error message(s) from the TSM server itself?

    Harry
  16. Replies
    15
    Views
    2,180

    Hi, strange thing is the TSM tries to open the...

    Hi,

    strange thing is the TSM tries to open the dsmserv.opt from C:\Program Files\Tivoli\TSM\tsm_server\
    It does not look like instance directory .... what guide have you followed?

    Harry
  17. Hi, well .. there's not much to do with...

    Hi,

    well .. there's not much to do with internal error - except calling the IBM which you did ...
    Seems the files are corrupted somehow.
    If IBM finds anything let us know please ....

    You can...
  18. Hi, what error message you get in the actlog...

    Hi,

    what error message you get in the actlog when trying to vary the volume online? This example is what I get when testing with read-only filesystem



    08/12/2014 14:18:20 ANR2017I...
  19. Hi, I like the line " ... whatever risk that...

    Hi,

    I like the line " ... whatever risk that may occur" ...
    First - if you speak with IBM support for a week then they definitely have more info than we do (after reading like 7 lines ....) -...
  20. Hi, although I did not test with TSM 7.1 and...

    Hi,

    although I did not test with TSM 7.1 and Linux I do not expect it to be different from previous versions. The location of the tape was always specified in the devconfig.out file (which was...
  21. Replies
    18
    Views
    2,722

    Hi, you need the "physical things" - library,...

    Hi,

    you need the "physical things" - library, drives, paths
    Then you need device class (which points to the library) and storagepool(s) - which are defined over device class. Storage pools are...
  22. Replies
    18
    Views
    2,722

    Hi, well, seems tapes are labeled - that is...

    Hi,

    well, seems tapes are labeled - that is good. What to do with them is another topic. Tapes are changed from scratch to private (mostly) automatically - if you allow the process to use Scratch...
  23. Replies
    18
    Views
    2,722

    Hi, missing device type info is not a problem...

    Hi,

    missing device type info is not a problem (it's there for mixed type cartridges libraries only)
    Do this (and send us complete output):


    checkout libvol HPLIBRARY ABK602L5 remove=no...
  24. Replies
    18
    Views
    2,722

    Hi, use "label libvolume HPLIBRARY search=YES...

    Hi,

    use "label libvolume HPLIBRARY search=YES checkin=scr labelsource=barcode" - as the tapes are already IN the library (not in the entry port) - therefore "Searcy=YES", not "search=bulk". If you...
  25. Replies
    18
    Views
    2,722

    Hi, if the TSM is run on windows (with non-IBM...

    Hi,

    if the TSM is run on windows (with non-IBM devices), then native windows driver is the preferred one


    But the TSM device driver should work as well.
    I suppose there is a drive type,...
  26. Replies
    18
    Views
    2,722

    Hi, what wee need is the activity log part...

    Hi,

    what wee need is the activity log part from the beginning of the LABEL LIBVOL command and the output of "q dri" "q libr" and "q path"

    Harry
  27. Replies
    18
    Views
    2,722

    Hi, have you run "label libvolume .... "...

    Hi,

    have you run "label libvolume .... " command? Tapes have to be initialized (labeled) before TSM can use them ...

    Harry
  28. Hi, exactly as domino says. Look - you do...

    Hi,

    exactly as domino says.

    Look - you do not NEED to set it up as being cluster aware IF you do not mind the problems mentioned in my first post. This is just the "recommended" way - if you do...
  29. Hi, well - this is kind of tricky. TSM stores...

    Hi,

    well - this is kind of tricky.
    TSM stores data in "filespaces" - by default (if no "special" features as "virtualmountpoint" is used) one mounted filespace (mountpoint, disk) is stored as a...
  30. Hi, first - this is just my opinion, have no...

    Hi,

    first - this is just my opinion, have no hard evidence

    maybe we are mixing two things here (although answer to both seems to be the same - NO)
    a) data stored by API clients (TDP for SQL)...
  31. Hi, API backupset were used by the special...

    Hi,

    API backupset were used by the special version of TSM - TSM Express. It was a special version for SMB segment with special SQL and Exchange agents with backupset capability. Never had these...
  32. Hi, the problem is in your scenario you are...

    Hi,

    the problem is in your scenario you are going to have the "\\folder1" being backed up twice in the TSM - once under "AIX1" and second time under "AIX2" node. If the filesystem is large, then...
  33. Replies
    1
    Views
    436

    Hi, check www.redbooks.ibm.com - there are...

    Hi,

    check www.redbooks.ibm.com - there are multiple hits for each term there.

    Harry
  34. Hi, 1) TSM does not "know" about the SAN disks...

    Hi,

    1) TSM does not "know" about the SAN disks - for the DISK/FILE volumes it just looks for the mountpoint (the full volume path - D:\TSMSTGPOOLS\Whatever\volume1). So if your can make the SAN...
  35. Thread: Format

    by Harry_Redl
    Replies
    2
    Views
    895

    Hi, the format is not documented/open - there...

    Hi,

    the format is not documented/open - there were projects for reading TSM tapes (look for "tsmtape.h") - but mostly you are on your own.
    I suppose the format is the same for FILE (if no...
  36. Hi, are you running the dsmupgrd on the 5.5.x...

    Hi,

    are you running the dsmupgrd on the 5.5.x server? Seems it tries to use instance directory of "/" - which is definitely wrong. Are your environmental variables (like DSMSERV_DIR) set?

    Harry
  37. Replies
    5
    Views
    1,149

    Hi, 1) 20TB archive weekly? What about...

    Hi,

    1) 20TB archive weekly? What about creating another node "From_DataDomain_WEEKLY" and run it once a week as an incremental backup?
    2) it is not allowed to have StorageAgent and TSM server on...
  38. Replies
    1
    Views
    292

    Hi, if the files do not exist, you have to...

    Hi,

    if the files do not exist, you have to repair the situation in the TSM. For the data having copies you can use "restore volume" (or "restore stgpool"). Volumes without copy have to be deleted...
  39. Hello, from what I see the volume in question...

    Hello,

    from what I see the volume in question is FILE based volume of the PRIMARY storage pool being marked as DESTROYED
    a) you cannot vary the volume offline - this operation is for RANDOM...
  40. Replies
    15
    Views
    2,180

    Hi, yes, modifying the port number (in the...

    Hi,

    yes, modifying the port number (in the dsmserv.opt) is important - question is how many clients/TSM servers connects to the "6.3 instance1" and "migrated 5.5 - soon to be 6.3 instance2". You...
  41. Hi, I have run in such problem (32 vs 64bit...

    Hi,

    I have run in such problem (32 vs 64bit TDP) - the solution was to keep 32bit TDP around ....
    My environment was on Solaris - I have found this Technote regarding Windows - maybe the root of...
  42. This is what my dblicm -l says and the MMC works...

    This is what my dblicm -l says and the MMC works - that's why I do not think the license is the problem



    C:\Program Files\Tivoli\TSM\db2\BIN>db2licm -l
    Product name: "DB2 Enterprise Server...
  43. Hi, well ... hard to tell without more info...

    Hi,

    well ... hard to tell without more info ... does the problem persist? If I understand it correctly - everything works (server is up, backups are running) - all what is wrong you cannot issue...
  44. Hi, well - do not think so ... looking at one...

    Hi,

    well - do not think so ... looking at one of my 6.3 servers teh "DB2 Connect Server" license is in the same state as yours. Can you show us screenshot from the MMC, corresponding activity log...
  45. Hi, does the server run? Can clients connect?...

    Hi,

    does the server run? Can clients connect? Can you connect via dsmadmc? Can you run the server on the foreground (log in as a instance user and run it as "dsmserv" in the appropriate...
Results 1 to 45 of 500
Page 1 of 12 1 2 3 4