Search:

Type: Posts; User: rallingham

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    272

    What happens, after you have tried to register...

    What happens, after you have tried to register the basic license, when you do a q drm? I would suspect that if you still have tapes referenced in DRM that you will not be able to go back to a basic...
  2. If the wrong tapes are showing up in the I/O...

    If the wrong tapes are showing up in the I/O slots, then open the door(s) to the I/O slots and then close them again. It sounds like either the door is open or the robot did not scan the tapes you...
  3. Which interface are you talking about...

    Which interface are you talking about specifically? Do you mean the Backup Archive Client web GUI? Or the Vcenter either native or accessed via the web browser? If you use the vcenter plugin and...
  4. Replies
    1
    Views
    267

    You may want to consider the lack of support and...

    You may want to consider the lack of support and compatibility with V5.x and V6.3. This could relate to your issues.
  5. If you downloaded from the FTP site, that is not...

    If you downloaded from the FTP site, that is not a licensed version. You need to get it from Passport Advantage. The license gets installed from the PPA site.
  6. Did you install a licensed version of TSM for the...

    Did you install a licensed version of TSM for the DR test? If so just do a register lic. Help register lic and follow the steps.
  7. Replies
    7
    Views
    272

    I have to admit I have not tried this procedure...

    I have to admit I have not tried this procedure but I do have to ask. When you renamed the file did you bounce TSM before registering the basic license?
  8. I cannot remember for sure, but I do think there...

    I cannot remember for sure, but I do think there are power-shell templates for you to work from.
  9. Replies
    7
    Views
    272

    From the manual >>> To unregister licenses, erase...

    From the manual >>> To unregister licenses, erase the NODELOCK file found in the server
    instance directory and reregister the licenses.
    The file specification can contain a wildcard character (*)....
  10. There are a number of enhancements. You can do...

    There are a number of enhancements. You can do the regular scripting, similar to V5 or you can use the Templates provided within the MMC plug-in and there is now a power-shell window that you can...
  11. Replies
    3
    Views
    190

    Check IBMs capatibility matrix. They don't always...

    Check IBMs capatibility matrix. They don't always support things like IE10. They support Firefox 3.5 for some and a little higher for others.
    If you are using IE10 bring it up, hit PF12 and go down...
  12. There are a few things that you could do, but...

    There are a few things that you could do, but since this is a windows server I would install the journalling feature and configure it. Once the initial backup is complete it will finish a lot quicker...
  13. Replies
    7
    Views
    796

    It sounds like a permissions problem or you have...

    It sounds like a permissions problem or you have an issue with the user ID for the Vcenter or the Password. What version of TSM4VE are you running? Also V4.1 of the Vcenter is kind of old and pretty...
  14. Thanks for the info. I have moved almost all my...

    Thanks for the info. I have moved almost all my customers to V6.3.4.300 and a couple to V7.1, but this customer just doesn't have budget to move to a bigger machine. I will give this a try.
  15. Replies
    7
    Views
    796

    How are you installing TSM4VE? Is this a local...

    How are you installing TSM4VE? Is this a local admin account or an administrative account with permissions for the Vcenter? You should enter the Vcenter ID and Password (I think) not the ESX...
  16. That was my thought initially. I have found a few...

    That was my thought initially. I have found a few things out there, but we cannot upgrade further. The customer is small and the windows box this is on is Win2003. TSMV6.3 is not supported for this...
  17. Multiple Errors in the TSM ACTLOG for TSM DB

    Has anyone seen this type of error showing up in the actlog? I have looked around and found a few things but nothing specific. I just upgraded a small shop to TSMV6.2.3 and I see the following errors...
  18. What is the difference between a File Level backup and Full VM backup

    In the BAC you can specify a FULL VM backup or a File level backup. What is the difference and what are the ramifications of choosing a File level backup as opposed to a FULL VM backup?
    I must have...
  19. [HOWTO] Where are the template files in TDP4SQL V6.4 and above

    I don't seem to be able to find the SQL Template file that are pulled in to the MMC when you try to schedule a backup from there. Unfortunately my customer has multiple database instances and if you...
  20. Replies
    2
    Views
    1,440

    I am not a SQL guy, but I have run in to this as...

    I am not a SQL guy, but I have run in to this as well. Search around and you will find an answer. Essentially you have to start the MMC pointing to a second instance of a database. There are...
  21. Replies
    7
    Views
    524

    Your best bet would be to set up server to server...

    Your best bet would be to set up server to server communications and export the node across the wire.
  22. You could use the NOPREMPT YES or NOPREMPT NO....

    You could use the NOPREMPT YES or NOPREMPT NO. Put it in the serve OPT file. First do a q opt to see what it is set at and I believe the command will toggle it. What this means is the NO PREMPT will...
  23. Replies
    3
    Views
    228

    Well check the manual and you will be given...

    Well check the manual and you will be given directions on how to define a tape library tape library path, tape drive and tape drive paths. The is the same for a physical library as well as a VTL. If...
  24. Replies
    3
    Views
    228

    Silly question from me. How did you define the...

    Silly question from me. How did you define the library and path?
  25. Replies
    8
    Views
    797

    Any interface into the OC would be good. I liked...

    Any interface into the OC would be good. I liked what I saw, but you couldn't do anything with it. I seem to recall that you could define a SMTP server address, but I never got around to that. I just...
  26. Replies
    8
    Views
    797

    I believe it is called the Operations Centre. I...

    I believe it is called the Operations Centre. I have loaded this up at a customer in Newfoundland recently. It is a nice dashboard etc. but I never got a chance to play with it. Right now it looks at...
  27. Replies
    8
    Views
    797

    Are you talking about Operational Reporting?...

    Are you talking about Operational Reporting? Sometimes called OR? It is gone in V6 of TSM and you have to use TCR (Tivoli Common Reporting) Or you can still use OR but you need to apply some changes...
  28. Replies
    8
    Views
    2,339

    Try excluding the offline DB from the backup.

    Try excluding the offline DB from the backup.
  29. Replies
    5
    Views
    750

    You could use something like this to see what is...

    You could use something like this to see what is being backed up:

    select SUB_ENTITY,ACTIVITY_TYPE,SUCCESSFUL,BYTES from SUMMARY_EXTENDED where
    START_TIME>current_timestamp - 24 hours and ENTITY...
  30. I agree this may be an older version of the...

    I agree this may be an older version of the device driver. Get something newer from the IBM site.
  31. Use the IBM Device Drivers, the device driver for...

    Use the IBM Device Drivers, the device driver for TSM. Windows drivers will not work properly.
  32. Replies
    5
    Views
    544

    I have one customer that uses their partitioned...

    I have one customer that uses their partitioned 3584 library heavily. Over the past 5 years I have seen the grippers fail about every 18 months. One year they failed and bent damaging the robot and...
  33. Thanks for the info. If the storage agents are...

    Thanks for the info. If the storage agents are running with the 63 server then all should be well.
  34. Actually yes, what you quoted is what I am...

    Actually yes, what you quoted is what I am asking. I wasn't sure if there were issues between the 55 server as a library client and the 64 server as the library manager. If it will work that will...
  35. TSM Library Client at V5.5.4 and Library Server at V6.3.4 and LTO6

    I have a customer that will have to migrate to TSM Server V6.3.4. Their current TSM serve is at V5.5.4. To get rid of the current tape library can the old TSM Server be set up as a Library Client to...
  36. Replies
    14
    Views
    911

    Backupsets are created on TSM using the...

    Backupsets are created on TSM using the information from the Backup Archive Client. In this case the BAC is not backing up the data, according to the error message. You are most likely using a TDP...
  37. I forget when they put them together. The older...

    I forget when they put them together. The older versions were not bundled the newer version are. What port are you trying to access the AC with? Also check in your services to be sure that the...
  38. No you do not need to install another TSM server....

    No you do not need to install another TSM server. So you installed the ISC. Did you install the AC? Were there any errors with the install of the AC?
  39. Look on the left side of the screen and see if...

    Look on the left side of the screen and see if there is a GETTING STARTED. You will get directions there for setting up the access to the TSM Servers.
  40. Thread: TDP for VE

    by rallingham
    Replies
    9
    Views
    1,752

    When you select the incremental forever, the...

    When you select the incremental forever, the first backup will be a full. The schedule will give a return code saying it failed, but if you look at the log file it will show that a full backup was...
  41. Replies
    4
    Views
    843

    If you are working from the command line and not...

    If you are working from the command line and not the AC (the AC is easier for this), use the: help define library, help define path, help define drive. This will get you what you want. Or check the...
  42. Replies
    4
    Views
    843

    You can run the ITDT or TSMDLST.EXE from within...

    You can run the ITDT or TSMDLST.EXE from within the TSM directory (I think it is in CONSOLE). That will tell you the MTx.x.x.x or device name. Then define the drive TAPE0 and then the path. You will...
  43. Replies
    23
    Views
    3,668

    One other item that you can look at is how have...

    One other item that you can look at is how have you defined the Library for the VTL. Is it defined as SCSI or as VTL? If it is VTL try updating the library so that it is defined as SCSI and see if...
  44. Thread: TDP for VE

    by rallingham
    Replies
    9
    Views
    1,752

    The first question is this. What version of...

    The first question is this. What version of TSM4VE are you running or installing? If you go with V6.4 everything is pretty much automatic. Your local node should be defined as normal. You will then...
  45. Thread: TDP for VE

    by rallingham
    Replies
    9
    Views
    1,752

    Is there a particular reason you do not want to...

    Is there a particular reason you do not want to use the Vcenter plugin? IT is easy to use and very reliable. I put this in two different customers over the past 2 weeks and each is very happy with...
Results 1 to 45 of 411
Page 1 of 10 1 2 3 4